-
The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.Warning: Unlike most Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board. -
General Description The DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC) with an integrated temperaturecompensated crystal oscillator (TCXO) and crystal. The device incorporates a battery input, and maintains accurate timekeeping when main power to the device is interrupted. The integration of the crystal resonator enhances the long-term accuracy of the device as well as reduces the piece-part count in a manufacturing line. The DS3231 is available in commercial and industrial temperature ranges, and is offered in a 16-pin, 300-mil SMD package. -
It is the Third recording module developed , this version is distinctly improved in the acoustic fidelity relative to the first and second version.- Built-in microcontroller serial communication interface
- 3V single-supply operation, low power consumption
- Multi-information processing
- Working current 25-30mA, to maintain current 1μA
- Information is not power to save 100 years (typical)
- High-quality, natural voice reduction technology
- 10 million times the recording period (typical)
- Automatic squelch
- Free adjustment of the clock chip, the external clock can be selected
-
Field of application: This programmer can read and write the bios chips of DVD,TV,PC,hard-disk,etc. Features: 1. USB 2.0 interface, the speed is 12Mbps. 2. The speed of reading and writing is very fast. 3. Auto detect chip modles. 4. Auto select power votage. 5. Auto off-line chip copy. 6. Software and firmware update. 7. Surpport 25 FLASH, 24 EEPROM, 25 EEPROM, 93 EEPROM,etc. 8. Smallshape. 9.Windows 2000, Windows XP, Windows Vista, Windows 7. -
Item: Pack of 24 Super Bright 12V White Piranha LED Panel Energy Saving Board Light Key Feature: Super bright Piranha LED light board Light board four corners with a fixed screw hole, easy fixed Lamp beads: 24 Operating voltage: 10V-14V (Recommended 12V DC) Operating Current: 160mA Rated Power: about 1.6W Life: about 50000-80000 hours Beam Angle: astigmatism (about 150 °) Light Color: White Dimensions: approx. 80 * 28mm (L*W) -
The encoder disc defines the transmission code of pulses; it is formed by a support made of plastic, glass or metallic material, on which is engraved a pattern of alternated clear (transparent) and opaque segments. -
L9110 chip is able to drive a single DC motor using two digital control inputs. One input is used to select the motor direction while the other is used to control the motor speed. Speed is controlled by using PWM Pulse Width Modulation. Motor drivers typically have what is called a truth table that determines the effect of its inputs. -
VS1003 is an MP3 module with on-board microphone, it supports audio decoding formats of MP3, MP3 V, WMA, WAV, MIDI and the SP-MIDI.Features
- Separate analog, digital and IO power supply; serial data and control interface (SPI).
- 1 headphones and audio output interface, the internal PLL clock frequency multiplier; high-quality stereo DAC, 16-bit adjustable-chip ADC, high-quality stereo earplugs drive (30 EURO)
- A microphone for recording, support for recording encoding format: IMA ADPCM (monaural).
- 1 ine_in input interface supports two input methods; supports MP3 and WAV streams.
- Separate analog, digital and IO power supply
- On-board 3.3V and 2.5V LDO chip AMS-1117, the largest current provide of 800mA.
- Single power supply: 5 VDC, capacitor filter.
- 12.288 MHz crystal.
-
Introduction: The AD8232 is a neat little chip used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram. Electrocardiography is used to help diagnose various heart conditions. -
The TB6560-3 Axis Stepper Motor Driver is a excellent microstepping driver that use TOSHIBA TB6560 Chip,based on pure-sine current control technology.Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors. -
BeagleBone Black is a low-cost, community-supported development platform for developers and hobbyists. Boot Linux in under 10 seconds and get started on development in less than 5 minutes with just a single USB cable. Processor: AM335x 1GHz ARM® Cortex-A8 512MB DDR3 RAM 4GB 8-bit eMMC on-board flash storage 3D graphics accelerator NEON floating-point accelerator 2x PRU 32-bit microcontrollers -
DHT11 digital temperature and humidity sensor is a composite Sensor contains a calibrated digital signal output of the temperature and humidity. Application of a dedicated digital modules collection technology and the temperature and humidity sensing technology, to ensure that the product has high reliability and excellent long-term stability. The sensor includes a resistive sense of wet components and an NTC temperature measurement devices, and connected with a high-performance 8-bit microcontroller. -
- The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption; When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode.
- Jog type : the initial state is low , high touch , do not touch is low ( similar touch of a button feature )
- Module can be installed in such as surface plastic, glass of non-metallic materials
- In addition to the thin paper ( non-metallic ) covering the surface of the module , as long as the correct location of the touch , you can make hidden in the walls, desktops and other parts of buttonsFeatures:
- Low power consumption
- Power supply for 2 ~ 5.5V DC
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
-
ESP-07 WiFi module is developed by Ai-thinker Team. core processor ESP8266 in smaller sizes of the module encapsulates Tensilica L106 integrates industry-leading ultra low power 32-bit MCU micro, with the 16-bit short mode, Clock speed support 80 MHz, 160 MHz, supports the RTOS, integrated Wi-Fi MAC/BB/RF/PA/LNA, on-board antenna. The module supports standard IEEE802.11 b/g/n agreement, complete TCP/IP protocol stack. Users can use the add modules to an existing device networking, or building a separate network controller.
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
