-
The module (MicroSD Card Adapter) is a Micro SD card reader module, through the file system and the SPI interface driver, MCU to complete the file system to read and write MicroSD card. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write. -
Highlights: By adjusting the potentiometer can set the length of time. MicroUSB 5.0V power supply with an input port, easy to use. 5 ~ 30V wide supply voltage. External signaltrigger and keytriggerin two ways. With a relay indicator. Anti-interference ability, the relay at various interference will not misoperation, suitable for industrial control. -
This module allows you to detect when sound has exceeded a set point you select. Sound is detected via a microphone and fed into an LM393 op amp. The sound level set point is adjusted via an on board potentiometer. When the sound level exceeds the set point, an LED on the module is illuminated and the output is sent low. -
This module integrates DHT11 sensor and other required components on a small PCB. The DHT11 sensor includes a resistive-type humidity measurement component, an NTC temperature measurement component and a high-performance 8-bit micro controller inside, and provides calibrated digital signal output. It has high reliability and excellent long-term stability, thanks to the exclusive digital signal acquisition technique and temperature & humidity sensing technology. -
CP2112 debug board USB to I2C Communication Module E-879 On-chip power-on reset circuit, on-chip voltage regulator: 3.45 V output Compliant with USB specification 2.0 standard; full speed (12Mbps) USB suspend status via SUSPEND and /SUSPEND pins Integrated 194-byte one-time programmable ROM for storing customizable product information 512-byte SMBus data buffer, configurable clock speed device address 7-bit value is the slave address of CP2112 Windows, Mac, and Linux HID to SMBus libraries API for rapid application development, open-access interface specifications. 8 GPIOs can be configured as input/output and open-drain/push-pull, configurable clock output for external devices 48MHz to 94kHz, switching LEDs during reading/write SMBus -
Omron Fiber Optic Sensor - E3X-NA11 2M-CHINA E-878 Red LED as the light source NPN output configuration Power supply voltage of 12 to 24 V Operates in Light-ON/Dark-ON mode Response time of 0.2 milliseconds Connection via a pre-wired cable, 2 meters in length -
ESP32-CAM-MB Download Bottom Board for ESP32-CAM OV2640 Camera Module Downloader with Micro USB Interface E-877 CH340G Driver Micro USB Connector Base Board USB Connector Type: Micro USB IO port: 9 Power supply: 5V 2A Support Interface: UART, SPI, I2C, PWM -
ESP32 30Pin Expansion Board with Type-C USB and Micro USB Dual Interface for ESP32 ESP-32 ESP-32S De E-876 Support LWIP protocol, Freertos, three modes : AP, STA and AP STA Support VIN external wide voltage input 5-12V power supply Hardware Interface—USB -
5V USB Aluminium Body Power Bank Case for 18650 Battery-BLACK E-875 Input Power: 5V DC at up to 1.5A Output Power: 5V DC at up to 1A Stabilized Output Power Support replacement of 18650 Li-battery. -
Dynamo Hand Crank Charger E-874 Maximum Output Voltage: DC5.5V/Maximum Output Current: 600mA/Interface type: USB It is better than a solar charger because you can use it even without the heat of the sun It is great for emergency situations, for trekking, fishing, camping, mountain climbing, and even just for everyday use -
2 Axis Pan Tilt Brackets For Camera/Sensors for Servo MG90S E-873 PV Nylon Head Two Axial plastic / Two axial platform Anti-vibration lightweight Good design and shape Net weight 20g Color : Black Material: Plastic. -
Acrylic Camera Bracket Case for Raspberry Pi Camera E-872 Material: Acrylic Color: Transparent Use for: Raspberry Pi OV5647 camera / Raspberry Pi official camera -
7 inch Capacitive Touch Screen LCD (C), 1024×600, HDMI, IPS, Low Power E-871 Brand: Waveshare Display Port: HDMI Display Panel: IPS Viewing Angle: 170 degree Touch Type: Capacitive Display Resolution: 1024×600. points capacitive touch control -
12V DC 1/2 Inch Electric Solenoid Water Air Valve Switch (Normally Closed) E-870 Rated Operating Voltage: 12V DC Rated Current: 1A Operation Mode: NC (Normally Closed) Pressure: 0.02 – 0.8MPa Max fluid temperature: 100°C -
MQ-136-Hydrogen Sulfide Gas Sensor Module E-869 Dual signal output (analog output and TTL level output) The TTL output effective signal is low. Analog output 0 ~ 5V voltage, the higher the concentration the higher the voltage. Good sensitivity to hydrogen sulfide, liquefied gas, natural gas, city gas, and smoke. with long service life and reliable stability fast response recovery characteristics -
0-100A Ac 20-500V Digital Voltmeter Ammeter E-868 Voltage Measuring Range: AC 20 -500V Current Measuring Range: 0 -100A Panel Size: 31x31mm / 1.22×1.22inch Installation Diameter: 20.3mm / 0.8inch color: yellow/blue/white/green/red Material: Plastic size: 22mm
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
