-
# Image shown is a representation only #
Step Angle : 5.625 /64 Rated Current : 0.6A Holding Torque :7Kg-cm -
T60 Underwater Thruster RMT-70 Thruster Parameters: Voltage Range: 12V-16V No load current: 0.7A Load Current: 15A-23A Motor KV Value: 860KV (2216 brushless motor) Motor Power: 300W Measured thrust: 3S LiPo 1.65kg/4S LiPo 2.1kg Thruster Dimensions: Shroud outer diameter: 72mm Shroud Width: 37mm Shroud Total Length: 92mm Overall Height: 3.0 inches (77 mm). Cost Width: 23mm -
Operating Voltage Range: 3 ~ 9VDC Loaded Current: 200 mA max Rated Speed: 1000 RPM Shaft Length: 10mm Shaft Diameter: 2mm# Image shown is a representation only #
-
RS-775 DC Motor 12V High Torque RMT-66 Operating Voltage: 12V (Can work upto 24V) No-load Current: 0.6A Maximum Current: 2A No Load Speed RPM @12V: Approx ~5000/6000 RPM No Load Speed RPM @24V: Approx ~11000/12000 RPM Diameter of the Motor: 41mm Length of the Motor (Body): 67mm Length of Shaft: ~16mm Motor Shaft Diameter: 5mm -
RS-555 DC motor 12V High Torque RMT-65 Body Length: 55 mm Diameter: 37 mm Speed: 12V - 5500 rpm, 24V - 13000 rpm Current(no-load): 12V - 210ma, 24V - 400ma Shaft Diameter: 3.17MM Axis Length: 14 mm out shaft -
# Image shown is a representation only #
-
# Image shown is a representation only #
Motor: Micro 2 phase 4 wire Stepper motor Voltage: 3V-5V DC , Step angle: 18 degrees Motor size: 15 MM x 11.3 MM -
N20-12V-500 RPM Micro Metal Gear-box DC Motor RMT-72 Motor Type: Center Shaft DC Geared Motor Base Motor: 30000 RPM Gear Ratio: 30 Rated Voltage: 12V DC No Load Current: 0.06 mA Stall Current: 0.75 A Rated Torque: 0.4 Kgcm Stall Torque: 1.2 Kgcm Shaft Type: D-type Single Side Shaft Diameter (mm): 3mm Shaft Length (mm): 9mm -
N20-12V-4000 RPM Micro Metal Gear-box DC Motor RMT-33 Motor Type: Center Shaft DC Geared Motor Base Motor: 30000 RPM RPM: 4000 Rated Voltage: 12V DC No Load Current: 0.06 mA Stall Current: 0.75 A Rated Torque: 0.1 Kgcm Stall Torque: 0.5 Kgcm Shaft Type: D-type Single Side Shaft Diameter (mm): 3mm Shaft Length (mm): 9mm Weight (gm): 12 -
N20-12V-300 RPM Micro Metal Gear-box DC Motor RMT-71 Motor Type: Center Shaft DC Geared Motor Base Motor: 30000 RPM Gear Ratio: 30 Rated Voltage: 12V DC No Load Current: 0.06 mA Stall Current: 0.75 A Shaft Type: D-type Single Side Shaft Diameter (mm): 3mm Shaft Length (mm): 9mm -
N20-12V-1000 RPM Micro Metal Gear-box DC Motor RMT-32 Motor Type: Center Shaft DC Geared Motor Base Motor: 30000 RPM RPM: 1000 Gear Ratio: 30 Rated Voltage: 12V DC No Load Current: 0.06 mA Stall Current: 0.75 A Rated Torque: 0.1 Kgcm Stall Torque: 0.5 Kgcm Shaft Type: D-type Single Side Shaft Diameter (mm): 3mm Shaft Length (mm): 9mm Weight (gm): 12 -
# Image shown is a representation only #
22mm RF-310 Motor DC 3V 3.6V 3.7V Large Torque -
MITSUMI 030 Brush DC Motor with Gear DC12V 13100RPM Biaxial RMT-23 Motor Size: 12 X 15.5MM; height: 19 MM Front output shaft length: 8 MM (front axle with a copper gear) ; After output shaft length: 14 MM Voltage: 12V DC; Current: 0.05A(stall 0.42A) Speed: 13100 RPM -
# Image shown is a representation only #
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
