-
PICkit 2 has a separate programmer/debugger unit which plugs into the board carrying the chip to be programmed, whereas the PICkit 1 was a single unit. This makes it possible to use the programmer with a custom circuit board via an In Circuit Serial Programming (ICSP) header. This feature is not intended[3] for so-called "production" programming, however. The PICkit 2 uses an internal PIC18F2550 with FullSpeed USB. The latest PICkit 2 firmware allows the user to program and debug most of the 8 and 16 bit PICmicro and dsPIC members of the Microchip product line. The PICkit 2 is open to the public, including its hardware schematic, firmware source code (in C language) and application programs (in C# language). End users and third parties can easily modify both the hardware and software for enhanced features. e.g. Linux version of PICkit 2 application software, DOS style CMD support, etc. -
The SD Card Shield is a simple solution for transferring data to and from a standard SD card. The pinout is directly compatible with Arduino, but can also be used with other microcontrollers. It allows you to add mass storage and data logging to your project. -
Highlights: By adjusting the potentiometer can set the length of time. MicroUSB 5.0V power supply with an input port, easy to use. 5 ~ 30V wide supply voltage. External signaltrigger and keytriggerin two ways. With a relay indicator. Anti-interference ability, the relay at various interference will not misoperation, suitable for industrial control. -
A unipolar stepper motor has one winding with center tap per phase. Each section of windings is switched on for each direction of magnetic field. Since in this arrangement a magnetic pole can be reversed without switching the direction of current, the commutation circuit can be made very simple (e.g., a single transistor) for each winding. Typically, given a phase, the center tap of each winding is made common: giving three leads per phase and six leads for a typical two phase motor. Often, these two phase commons are internally joined, so the motor has only five leads. -
A unipolar stepper motor has one winding with center tap per phase. Each section of windings is switched on for each direction of magnetic field. Since in this arrangement a magnetic pole can be reversed without switching the direction of current, the commutation circuit can be made very simple (e.g., a single transistor) for each winding. Typically, given a phase, the center tap of each winding is made common: giving three leads per phase and six leads for a typical two phase motor. Often, these two phase commons are internally joined, so the motor has only five leads. -
Operating temperature -30 to 80 Operating Voltage 3.3V-4.2V Power Voltage 3.4V Standby average current 3ma the following Stand by GSM / GPRS Four bands, including 850,900,1800,1900MHZ GPRS Class 10 Sensitivity -105 Support voice calls Stand by SMS SMS Stand by GPRS Data services, the maximum data rate, downloads 85.6Kbps, Upload 42.8Kbps Supports standard GSM07.07,07.05 AT Command and Ai Thinker Extended Command Stand by 2 A serial port, a serial port to download, a AT Command port AT Command supports standard AT and TCP / IP Command interface It supports digital audio and analog audio support HR , FR , EFR , AMR Speech coding Stand by ROHS , FCC , CE , CTA Certification SMT 42PIN Packaging -
The official Raspberry Pi 3 case in a stunning Red & white design Optional clip-on lid provides protection but can be removed if using a HAT All primary ports (including micro SD) accessible Removable side plate allows access to those wonderful GPIO pins Snug and secure fit. -
It is a 75MM X 60MM solar cell. Which has 7.5V / 50MA rating. -
The MAX6675 performs cold-junction compensation and digitizes the signal from a type-K thermocouple. The data is output in a 12-bit resolution, SPI™-compatible, read-only format. This converter resolves temperatures to 0.25°C, allows readings as high as 1024°C, and exhibits thermocouple accuracy of 8LSBs for temperatures ranging from 0°C to 700°C. The MAX6675 is available in a small, 8-pin SO package.
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
