-
TCS3200 Color Sensor is a complete color detector, including a TAOS TCS3200 RGB sensor chip and 4 white LEDs. The TCS3200 can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few.
-
1. 10 DOF Module (3 axis gyroscope 3 accelerometer 3 axis magnetic field air pressure) 2. Technology:Immersion Gold PCB 3. Chip: MPU6050 HMC5883L MS5611 4.Power Supply :3-5v 5.Communication: IIC communication protocol (fully compatible with the 3-5v System, circuit LLC is contained ) 6.Size: 2.2cm * 1.7cm
-
Power dissipation:1w Power supply: 1.1-3.6V DC – typically 3.3V DC Resolution: 16bit Temperature measuring range: -40-125 ° C Temperature measurement resolution: 0.01 ° C Temperature measurement accuracy: ± 0.2 ° C Humidity measurement range: 0-100% RH Humidity measurement resolution: 0.01 RH Humidity measurement accuracy: ± 1.8% RH
-
The ML8511 sensor breakout is an easy to use ultraviolet light sensor. The MP8511 UV Sensor outputs an analog signal in relation to the amount of UV light it detects. This can be handy in creating devices that warn the user of sunburn or detect the UV index as it relates to weather conditions. This sensor detects 280-390nm light most effectively. This is categorized as part of the UVB (burning rays) spectrum and most of the UVA (tanning rays) spectrum.
-
Description:
- Hall Effect switch is a high sensitivity hall-effect switch designed for high temperature operation - up to 150°C.
- The uni-polar switching characteristic makes these devices ideal for use with a simple bar or rod magnet.
- signal output indication
- Single channel signal output
- Output effective signal is low level
- Sensitivity adjustable
- When there is Magnetic field cutting there is signal output
- Circuit board output switch quantity(can connect MCU directly)
- Can be used in such occasions as Motor speed/location detecting
- Size: 32mm X 14mm
- There is mounting screw holes of 3mm
-
Working voltage: 4.5V to 5.5 V. Transmit tube pressure drop: Vf = 1.6 V Transmit tube current: 20 mA Signal output: A, B two way; The TTL level Distinguish precision: 0.01 mm Measurement frequency, 100 KHZ Encoder diameter: 24 mm Encoder type D hole diameter: 4 mm The encoder resolution: 20 line Speed measuring sensor configuration: The configuration can measures 1 road motor speed
-
HC-06 RF Wireless Bluetooth Transceiver Slave Module RS232 / TTL to UART converter and adapter. This module is an Upgrade from the older HC-05 and has better stable Firmware. Features: Bluetooth Serial Transceiver Module with backboard. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both senders receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, and then this module will search again automatically. Built in antenna Bluetooth version: V2.0 EDR
-
The HDPMO1 is a dual-axis magnetic sensor, it is a complete sensing system with on-chip signal processing and integrated I2C bus, allowing the device to be connected directly to a microprocessor eliminating the need for A/D converters or timing resources. It can measure magnetic field with a full range of ±2 gausses and a sensitivity of 512counts/gauss @3.0 V at 25°C.
-
Bring oscillation source Audino 9012 drive Work Voltage:3.3V-5V Set bolt hole, easy to assemble PCB Dimension:3.3cm*1.3cm It and your Arduino will be able to play melodies. This is a small buzzer for the Sensor Shield. It creates different sound based on the different frequency of I/O toggling. Pin Definition : Vcc : 3.3V-5V GND : The Ground I/O : I/O Interface of SCM
-
Feature: Internal with logic level conversion circuit. No need external 5V level to turn into a 3.3V level The power input port with anti-anti-circuit. To avoid accidental power plug reversed, leading to the module burned HM-10, HM-11 series Bluetooth module using TI CC2540 chip, configuration 256Kb space, support AT commands, you can change the role (master and slave mode) and the baud rate, the device name, Pairing password and other parameters, convenient and flexible.