-
Description: The GY8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal in relation to the amount of UV light that’s detected. This breakout can be very handy in creating devices that warn the user of sunburn or detect the UV index as it relates to weather conditions.This sensor detects 280-390nm light most effectively. This is categorized as part of the UVB (burning rays) spectrum and most of the UVA (tanning rays) spectrum. It outputs a analog voltage that is linearly related to the measured UV intensity (mW/cm2). If your microcontroller can do an analog to digital signal conversion then you can detect the level of UV! -
This is Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage , lack of connectors, and USB off board. -
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip (datasheet). The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top. The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega -
- Can detect flame or wavelength of light source within 760nm~1100nm.
- Lighter flame detect distance 80cm.
- Greater the flame, farther the test distance.
- Detect angle: 60 degree, very sensitive with flame spectrum.
- The sensitivity is adjustable.
-
Here is a motor speed sensor module, the major goal is to check the rate of an electric motor. The module can be used in association with a microcontroller for motor speed detection, pulse count, position limit, etc. In principle, any rate meter simply measures the rate at which some event occurs. Usually this is done by counting the events for a given period of time (integration interval) and then simply dividing the number of events by the time to get the rate. -
USB to UART Converter is a very useful tool for Embedded Systems. If you haven’t one, please try to buy it. It will definitely boost development speed of projects which uses UART modules like interfacing GSM, GPS, Bluetooth, Wi-Fi et. By using it we can easily study these modules by sending data directly from your PC and analyzing the received data in your computer display without programming a microcontroller. Here we will use PL2303, one of the most popular USB to UART Converter manufactured by Prolific Technology Inc. -
MQ-135 is sensitive air quality sensor that detects NH3, NOx, alcohol, benzene, smoke, CO2, etc. Heater voltage 5V, 31 ohm (40mA consumption) The board has digital and analog output.FEATURES
- Detects NH3, NOx, alcohol, benzene, smoke, CO2, etc.
- Operating voltage 5V
- Operating current 40mA
- Both digital and analog output
- Popular sensor - a lot of examples available for different platforms
- Port explanation : AO for analog output, DO for digital output, GND for ground, VCC for 5V voltage input
-
TCS3200 Color Sensor is a complete color detector, including a TAOS TCS3200 RGB sensor chip and 4 white LEDs. The TCS3200 can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few. -
Description:- The dimensions: 32mm x 14mm approx
- The working voltage: 3.3V-5V DC
- On-board LM393 voltage comparator chip and vibration sensing (generally SW-18010P) probe.
- Sensitivity adjustable (fine tune) using potentiometer.
- Can be used to detect vibration and other occasions.
- On-board output signal indication LED, effective output signal is high level, and the same time the indicator LED turns on.
- Output signal can be directly connected to the microcontroller I
-
Product description: Description: stm32f103c8t6 Minimum System Board, Beginner Level Board! Also, keil arm compiler, jlink, serial download, upgrade from 51 to arm, original chip, stable and high quality, easy to use, exclusive design and development, technical support well! Purchase. Features: stm32f103c8t6 Minimum System Learning Development Board Power supply voltage: 1. USB - 5 V 2.5 Volt front row power supply 3.3 V power supply option Typical application: led flashing light program (support various other programs) Main resources: 1. USB function 2. user led 3. power led 4. reset Maximum features: 1. compact design, easy to carry 2. full gold leaf in the front row 3. switch for imported material, etc. Dimension: 4.5 cm * 6.2 cm
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
