-
This sensor takes a continuous reading of any obstacle and settles it at output in TTL form within 2ms. The sensor provides easy interface of 3-wire with power, ground and the output voltage. The sensor works on 5V input Features -Very Small in size -Less influence on the color of reflected objects, reflectivity -Industrial grade quality -Can detect colour difference from certain range -TTL output high whenever sensor senses a obstacle -Detecting distance of 3cm to 80cm -External control circuit unnecessary -Low cost -Has inbuilt lenses assembly and potentiometer to set range of the module -Output indication LED
-
Features 1 Input voltage range:4 -40VDC 2 Output voltage range:1.25-37VDC adjustable 3 Output current:2A 4 voltmeter range: 0 to 40V, error 0.1V 5 Input reverse polarity protection 6 Built in output short protection function 7 Built in thermal shutdown function 8 L x W x H =6.1*3.4*12 cm 9 Weight: 22g 10 LED digital voltmeter tube, the accuracy is adjustable function, can be aimed at your multimeteradjustable accurate. 11 Press the rightkey to let the display show the input or output voltage. when the right OUT led light, it shows output, the left IN led show input.
-
This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to -16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited to measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0 degrees;.
-
'-24V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current. -Equipped with high-current relay, AC250V 10A ; DC30V 10A. -Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). -Indication LED’s for Relay output status.
-
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chip-sets.
-
This is an IC Test Clip for 8-pin small outline integrated circuits (SOIC). This test clip assures a secure connection to all chip leads on an 8-pin SMD SOIC and provides hands-free testing. On this test clip you will find two sets of gold plated contacts, upper contacts to attach wiring and lower contacts for an 8-pin IC. Simply place your choice of IC in the lower contacts and attach female terminated jumper wires to the 0.1" spaced upper contacts and you are ready to start testing!