-
The rotary encoder is a rotary input device (as in knob) that provides an indication of how much the knob has been rotated AND what direction it is rotating in. It’s a great device for stepper and servo motor control. You could also use it to control devices like digital potentiometers. A rotary encoder has a fixed number of positions per revolution. These positions are easily felt as small “clicks” you turn the encoder. -
This capacitive touch sensor module uses the TTP229 integrated circuit, making it easy to add capacitive touch input to your project. It features 16 sensitive touch pads that make an ideal replacement for the old fashioned keypads.Specifications:
-On-board 16-key TTP229 capacitive touch sensor IC -On-board power indicator LED -Working Voltage Range: 2.4 V to 5.5 V -Configurable output mode -PCB Size: 49.3 x 64.5 mm -
Introduction: The turbidity sensor detects water quality by measuring the levels of turbidity. It uses light to detect suspended particles in water by measuring the light transmittance and scattering rate, which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases. Turbidity sensors are used to measure water quality in rivers and streams, wastewater and effluent measurements, control instrumentation for settling ponds, sediment transport research and laboratory measurements. Specification:- Operating Voltage: 5V DC
- Operating Current: 40mA (MAX)
- Response Time : <500ms
- Insulation Resistance: 100M (Min)
- Output Method:
- Analog output: 0-4.5V
- Digital Output: High/Low level signal (you can adjust the threshold value by adjusting the potentiometer)
- Operating Temperature: 5℃~90℃
- Storage Temperature: -10℃~90℃
- Weight: 30g
- Adapter Dimensions: 38mm*28mm*10mm/1.5inches *1.1inches*0.4inches
-
K150 is the latest of a low-cost high-performance PIC programmer, support most popular PIC chip burning Write, read, encryption and other functions, use a high-speed USB communication, ultra-fast programming, programming quality is stable and reliable. (Speed Average PICSTART 3-5 times) fully automatic programming verification; with 40pin DIP programmer seat, direct programming 8pin-40pin DIP chip; outside 8pin-40 pin chip software compatible board the ICSP interface online download; The Windows98 and Windows2000/NT, Windows XP operating system; software will constantly with the PIC's new device Upgrade. Master chip retains DIP package with seat! -
Sensitive material of MQ-4 gas sensor is SnO2, which with lower conductivity in clean air. When the target combustible gas exist the sensors conductivity increases higher along with the gas concentration rising. MQ-4 gas sensor has high sensitivity to Natural gas, Methane and could be used to detect both Methane and Propane. The sensor could be used to detect different combustible gas especially Methane, its low cost and suitable for different application. Features: -High sensitivity to Combustible gas in wide range. -High sensitivity to Natural gas Methane, Coal gas, CO etc gas. -Fast response. -Wide detection range. -Stable performance, long life, low cost. -Simple drive circuit. -
FEATURES: * High sensitivity to CH4，Natural gas. * Small sensitivity to alcohol, smoke. * Fast response . * Stable and long life * Simple drive circuit APPLICATION: They are used in gas leakage detecting equipment in family and industry, are suitable for detecting of CH4,Natural gas.LNG, avoid the noise of alcohol and cooking fumes and cigarette smoke. -
A pH sensor is a scientific instrument that measures the hydrogen-ion concentration (orpH) in a solution, indicating its acidity or alkalinity. The pH sensor measures the difference in electrical potential between a pH electrode and a reference electrode. -
SIM800 is a complete Quad-band GSM/GPRS solution in a SMT type which can be embedded in the customer applications.SIM800 support Quad-band 850/900/1800/1900MHz, it can transmit Voice, SMS and data information with low power consumption. With tiny size of 24*24*3mm, it can fit into slim and compact demands of customer design. Featuring Bluetooth and Embedded AT, it allows total cost savings and fast time-to-market for customer applications. -
General Description GY-26-USART is a low cost plane digital compass module. The working principle is utilizing magnetoresistive sensor sensing the Earth's magnetic field component to get an azimuth angle. It communicates with upper computer through UART. Output format is ASCII. With solid state compass design, it has stable operation, high accuracy and advanced hard iron compensation function. It can overcome surrounding magnetic interference. Baud rate is optional. The product has three work modes; Normal mode, continuous mode and calibration mode. You can choose UART or IIC communication to use it. -
The ML8511 sensor breakout is an easy to use ultraviolet light sensor. The MP8511 UV Sensor outputs an analog signal in relation to the amount of UV light it detects. This can be handy in creating devices that warn the user of sunburn or detect the UV index as it relates to weather conditions. This sensor detects 280-390nm light most effectively. This is categorized as part of the UVB (burning rays) spectrum and most of the UVA (tanning rays) spectrum. -
The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface. This tiny little board does all of the neat-o Arduino tricks that you’re familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz , this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 12VDC. -
Features: -With relay output, this module is used to detect the humidity and control related the device power directly. -This product make use of HR202 humidity sensor. -The comparator outputs drive relays directly. It connects to 220V AC or other devices. -With leads, sensor interface can be installed with pin. -It's easy to install with 4 0.3cm fixing bolt hole. -When ambient humidity exceeds the setting threshold value the relay sucks and shuts, what's more, the common terminal connects to the start. -If the ambient humidity below the setting threshold value, the situation will be counter. -Common, normally open and normally closed the three ports are equivalent to a dual-control switch. -When the relay coil is electrified, the common will connect to the normally open, otherwise, the common will connect to normally closed. -
Features :- Ready to plug & play.
- It can connect to various modules like sensors, servos, relays, buttons, potentiometers
- Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.
-
SIM808 module is a GSM and GPS two-in-one function module. It is based on the latest GSM/GPS module SIM808 from SIMCOM, supports GSM/GPRS Quad-Band network and combines GPS technology for satellite navigation. It features ultra-low power consumption in sleep mode and integrated with charging circuit for Li-Ion batteries, that make it get a super long standby time and convenient for projects that use rechargeable Li-Ion battery. It has high GPS receive sensitivity with 22 tracking and 66 acquisition receiver channels. Besides, it also supports A-GPS that available for indoor localization. -
Highlights:The whole network smallest adjustable boost module can be easily installed in a variety of small equipment.The module supports MicroUSB input,using a USB charger or mobile power supply can easily get the voltage of 9V, 12V, 15V, 18V, 24V.It easy to use.Wide input and output voltage range and high conversion efficiency.Features:1. Maximum output current: 2A (recommended for using within 1A).2.Input voltage: 2 v ~ 24 v.3. Maximum output voltage:> 28 v (recommended for using within 26V).4. Efficiency:> 93%.5. Size: 30mm * 17mm * 14mm (L * W * H). -
HX711 is a precision 24-bit analog to-digital converter (ADC) designed for weigh scales and industrial control applications to interface directly with a bridge sensor. The input multiplexer selects either Channel A or B differential input to the low-noise programmable gain amplifier (PGA). Channel A can be programmed with a gain of 128 or 64, corresponding to a full-scale differential input voltage of ±20mV or ±40mV respectively, when a 5V supply is connected to AVDD analog power supply pin. Channel B has a fixed gain of 32. -
P/N: Door lock solenoid NC-0837L-12V Materials: Copper lines, Matal, Cable Related Voltage: 12V/ DC Stroke VS Force 50grams @ 10mm Power 8 wattages Mounting hole: 6.8*3mm/0.26"*0.12"(L*W) Insulation Resistance: 100M Ohms, 500V DC Dielectric Voltage 700V DC per seconds Life cycle 1,000,000 cycle min Color Silver -
Description: -Color: red. -Main chip: LM393. -Operating voltage: DC 5V. -Light weight design. -With single channel signal output. -Low level output signal used for human body touch sensor alarm. -Compatible with Arduino. -
The nRF24L01 is used on a wide variety of applications that require wireless control. They are transceivers which this means that each module can transmit and receive data. These modules are very cheap and you can use them with any microcontroller (MCU). Specifications nRF24L01 – 2.4GHz RF Transceiver- Low cost single-chip 2.4GHz GFSK RF transceiver IC
- Range with Antenna: 250Kb rate (Open area) >1000 meter
- Power: Ultra low power consumption
- Input Voltage: 3.3V
- Pins: 5V tolerant
-
Inputs
- GND – This is where you connect the low side of the voltage you are measuring. Caution! : This is the same electrical point as your Arduino ground.
- VCC: The is where you connect the high side of the voltage you are measuring
Outputs
- S: This connects to your Arduino analog input.
- – (or minus): This connects to your Arduino ground.
- : This is not connected. It does absolutely nothing.
-
DescriptionThis is a speed sensor, the major goal is to check the rate of motor.It was widely used in motor speed detection, pulse count, the position limit, etc.Features:-Groove type optical coupling sensor-The output state light, lamp output level, the output low level light.-Covered, output high level;Without sunscreen, the output low level.-The comparator output signal is clean, good waveform, driving ability is strong, for more than 15 ma.-It has a fixed bolt hole, convenient installation. -
The SIM900 is a complete Quad-band GSM/GPRS solution in a SMT module which can be embedded in the customer applications. Featuring an industry-standard interface, the SIM900 delivers GSM/GPRS 850/900/1800/1900MHz performance for voice, SMS, Data, and Fax in a small form factor and with low power consumption. With a tiny configuration of 24mm x 24mm x 3 mm, SIM900 can fit almost all the space requirements in your M2M application, especially for slim and compact demand of design. -
Description: -Mini PFM Control. -On-board input voltage indicator. -High conversion efficiency, maximum to 96%. -Any DC voltage input 0.9V ~ 5V, output 5V DC voltage can be stable, with two AA batteries input to the output current of 500-600MA, single AA battery power supply output current about 200MA. -On-board USB female, can supply power directly to the USB interface. -Small dimension. -
CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. This CAN-BUS Shield adopts MCP2515 CAN Bus controller with SPI interface and MCP2551CAN transceiver to give your Arduino/Seeeduino CAN-BUS capability. With an OBD-IIconverter cable added on and the OBD-II library imported, you are ready to build an onboard diagnostic device or data logger. -
CH340 is a USB bus convert chip and it can realize USB convert to serial interface, USB convert to IrDA infrared or USB convert to printer interface. In serial interface mode, CH340 supplies common MODEM liaison signal, used to enlarge asynchronous serial interface of computer or upgrade the common serial device to USB bus directly. More detail about USB convert to printer interface please referring to the second manual CH340DS2. In infrared mode, add infrared transceiver to CH340 can compose USB infrared adapter, realize SIR infrared communication.
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
