-
The Winson WCS1600 current sensor provides economical and precise solution for both DC and AC current sensing in industrial, commercial and communications systems. The unique package provides easy implementation without breaking original system and makes current sensing possible. Typical applications include motor control, load detection and management, over-current fault detection and any intelligent power management system etc.
-
200grm Straight Bar Mini Load Cell RSN-157 Weight Capacity Max - 200 g Maximum Overload - 220 g Cell Repeatability Error Max - ± 50 mg Cell Non-Linearity Max - 50 mg Cell Hysteresis Max - 50 mg Electrical Properties Rated Output - 600 μV/V Rated Output Error Max ± 150 μV/V Output Impedance 1 kΩ Creep 100 mg/hr Temperature Effect on Zero 5 mg/°C Temperature Effect on Span 5 mg/°C Supply Voltage Min 3 V DC Supply Voltage Max 10 V DC Zero Balance Ratio ± 100 μV/V Material - Aluminium Alloy (LY12CZ) Screw Thread Size - 2.5M 47mm x 12mm x 6mm, 110mm Wire
-
Mini-size RS232 DB9 female port to RS485 RS422 DB9 male connector Hot-swappable and plug & play, port-powered over RS232 RS485 RS422 Unique serial charge pump drive technology, TXD/RXD/GND communication The range of baud rate: 300bps-115.2Kbps Working Mode: asynchronous half-duplex (RS485) or full-duplex (RS422)
-
GH-719 microwave sensor module is non-contact displacement probe-type modules, RFI ability, independent of temperature, humidity, light, air, dust impacts can be installed in a certain thickness of the plastic, glass, wood and other non-metallic shell which facilitate their application to control a variety of products or equipment above. Second, the adjustments of the circuit board:A 16-level sensitivity adjustment: the circuit board with 4 0 1 2 3 marked the connection point. 1: Short circuit in accordance with the following four connections, adjustable 16- level sensitivity, so that in the 0.3-10 m sensing distance adjustable. 2:4 a connection point break, the nearest sensor, at 0.5 meters.B 4 trigger modes to adjust: the circuit board there are two connections marked with 45 points.
-
General Description GY-26-USART is a low cost plane digital compass module. The working principle is utilizing magnetoresistive sensor sensing the Earth's magnetic field component to get an azimuth angle. It communicates with upper computer through UART. Output format is ASCII. With solid state compass design, it has stable operation, high accuracy and advanced hard iron compensation function. It can overcome surrounding magnetic interference. Baud rate is optional. The product has three work modes; Normal mode, continuous mode and calibration mode. You can choose UART or IIC communication to use it.
-
The Arduino USB Host Shield allows you to connect a USB device to your Arduino board. The Arduino USB Host Shield is based on the MAX3421E (datasheet), which is a USB peripheral/host controller containing the digital logic and analog circuitry necessary to implement a full-speed USB peripheral or a full-/low-speed host compliant to USB specification rev 2.0. The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules onto the board. The following device classes are supported by the shield: HID devices: keyboards, mice, joysticks, etc. Game controllers: Sony PS3, Nintendo Wii, Xbox360. USB to serial converters: FTDI, PL-2303, ACM, as well as certain cell phones and GPS receivers. ADK-capable Android phones and tables. Digital cameras: Canon EOS, Powershot, Nikon DSLRs and P&S, as well as generic PTP. Mass storage devices: USB sticks, memory card readers, external hard drives, etc. Bluetooth dongles.
-
This is a breakout board for Freescale’s MMA7361L three-axis analog MEMS accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ±1.5g and ±6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and 0g-detect which detects linear freefall. Zero-g offset and sensitivity are factory set and require no external devices.
-
The HDPMO1 is a dual-axis magnetic sensor, it is a complete sensing system with on-chip signal processing and integrated I2C bus, allowing the device to be connected directly to a microprocessor eliminating the need for A/D converters or timing resources. It can measure magnetic field with a full range of ±2 gausses and a sensitivity of 512counts/gauss @3.0 V at 25°C.
-
The kit contains:
- JoyStick
- Flame Sensor
- RGB LED
- Heartbeat Sensor
- Light Cup
- Hall Magnetic Sensor
- Relay
- Linear Hall Sensor
- SMD RGB
- 7 Color Flash
- Tilt Switch
- Temperature Sensor
- Big Sound Sensor
- Touch Sensor
- Two-Color LED
- Laser Emitter
- Ball Switch
- Analog Temperature Sensor
- Small Sound Sensor
- Digital Temperature Sensor
- Two-Color LED (small)
- Button
- Photoresistor
- IR Emission
- Tracking Sensor
- Buzzer
- Reed Switch
- Shock Sensor
- Temperature And Humidity Sensor
- IR Receiver
- Avoidance Sensor
- Passive Buzzer
- Mini Reed
- Rotary Encoders
- Analog Hall Sensor
- Tap Module
- Light Blocking