-
P/N: Door lock solenoid NC-0837L-12V Materials: Copper lines, Matal, Cable Related Voltage: 12V/ DC Stroke VS Force 50grams @ 10mm Power 8 wattages Mounting hole: 6.8*3mm/0.26"*0.12"(L*W) Insulation Resistance: 100M Ohms, 500V DC Dielectric Voltage 700V DC per seconds Life cycle 1,000,000 cycle min Color Silver -
HX711 is a precision 24-bit analog to-digital converter (ADC) designed for weigh scales and industrial control applications to interface directly with a bridge sensor. The input multiplexer selects either Channel A or B differential input to the low-noise programmable gain amplifier (PGA). Channel A can be programmed with a gain of 128 or 64, corresponding to a full-scale differential input voltage of ±20mV or ±40mV respectively, when a 5V supply is connected to AVDD analog power supply pin. Channel B has a fixed gain of 32. -
Highlights:The whole network smallest adjustable boost module can be easily installed in a variety of small equipment.The module supports MicroUSB input,using a USB charger or mobile power supply can easily get the voltage of 9V, 12V, 15V, 18V, 24V.It easy to use.Wide input and output voltage range and high conversion efficiency.Features:1. Maximum output current: 2A (recommended for using within 1A).2.Input voltage: 2 v ~ 24 v.3. Maximum output voltage:> 28 v (recommended for using within 26V).4. Efficiency:> 93%.5. Size: 30mm * 17mm * 14mm (L * W * H). -
SIM808 module is a GSM and GPS two-in-one function module. It is based on the latest GSM/GPS module SIM808 from SIMCOM, supports GSM/GPRS Quad-Band network and combines GPS technology for satellite navigation. It features ultra-low power consumption in sleep mode and integrated with charging circuit for Li-Ion batteries, that make it get a super long standby time and convenient for projects that use rechargeable Li-Ion battery. It has high GPS receive sensitivity with 22 tracking and 66 acquisition receiver channels. Besides, it also supports A-GPS that available for indoor localization. -
Features :- Ready to plug & play.
- It can connect to various modules like sensors, servos, relays, buttons, potentiometers
- Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.
-
A versatile relay board with opto-isolated input. The relay channel can drive up to 10A @28VDC- 5V supply voltage / input signals
- Jumper to select high/low
- Equiped with a high-current relay (10A @ 28VDC)
- 2x LEDs that show the current state of the relay
-
NodeMCU is an open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module. The term "NodeMCU" by default refers to the firmware rather than the development kits. The firmware uses the Lua scripting language. It is based on the eLua project, and built on the Espressif Non-OS SDK for ESP8266. It uses many open source projects, such as lua-cjson, and spiffs. -
Arduino Adapter Shield Turn Nano v3.0 to Uno can turn your Arduino Nano into a normal style Arduino Uno, so you use it not only as arduino nano itself, but also as a Uno with more standard shield. -
The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface. This tiny little board does all of the neat-o Arduino tricks that you’re familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz , this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 12VDC. -
Features: -With relay output, this module is used to detect the humidity and control related the device power directly. -This product make use of HR202 humidity sensor. -The comparator outputs drive relays directly. It connects to 220V AC or other devices. -With leads, sensor interface can be installed with pin. -It's easy to install with 4 0.3cm fixing bolt hole. -When ambient humidity exceeds the setting threshold value the relay sucks and shuts, what's more, the common terminal connects to the start. -If the ambient humidity below the setting threshold value, the situation will be counter. -Common, normally open and normally closed the three ports are equivalent to a dual-control switch. -When the relay coil is electrified, the common will connect to the normally open, otherwise, the common will connect to normally closed.
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
