-
Max Temperature Difference- 40 C Above / Rated Voltage- 12V( max. 15V Starting Current 2 x 5.8A) Working Current- Imax.=2 x 4~4.6A(Rated 12V) / Refrigeration Power- Max. 2 x 50W / Working Environment Operating Voltage of Fan- DC 12V / Small Fan Size - 40 X 40 X 10mm / Conduction Module Size- 60 X 45
# Image shown is a representation only #
-
HLK-RM04 is a new embedded UART-ETH-WIFI module (serial port - Ethernet -Wireless network). This product is an embedded module based on the universal serial interface network standard, built-in TCP / IP protocol stack, enabling the user serial port, Ethernet, wireless network (wifi) interface between the conversions. Through the HLK-RM04 module, the traditional serial devices do not need to change any configuration; data can be transmitted through the Internet network. Provide a quick solution for the user’s serial devices to transfer data via Ethernet.
-
LPC2148 16/32 bit ARM7TDMI-S with 512K Bytes Program Flash, 42KBytes RAM, USB 2.0, RTC, 10 bit ADC 2.44 uS, 2x UARTs, 2x I2C, SPI, 2x 32bitTIMERS, 6x PWM, 8x CCR, 1x DAC, WDT, 5V tolerant I/O, up to 60MHz operation standard JTAG connector with ARM 2x10 pin layout forprogramming/debugging with ARM-JTAG Perfect solution for developing USB peripherials status LED power supply LED power supply filtering capacitor 12 Mhz crystal on socket 32768 Hz crystal and RTC backup battery connector extension headers for all uC ports Extension header for Voltages 3.3v , UART , JTAG and USB D D-
-
The board has in built Programmer capable of programming both AVR & 8051 family ICs.A 40 pin ZIF socket is used as Target to hold the 8051 IC. Additional 40 pin ZIF socket with modified connection is provided to host AVR ICs.This additional ZIF socket should be placed over the on- board ZIF socket to use AVR ICs.
-
Introduction: The turbidity sensor detects water quality by measuring the levels of turbidity. It uses light to detect suspended particles in water by measuring the light transmittance and scattering rate, which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases. Turbidity sensors are used to measure water quality in rivers and streams, wastewater and effluent measurements, control instrumentation for settling ponds, sediment transport research and laboratory measurements. Specification:
- Operating Voltage: 5V DC
- Operating Current: 40mA (MAX)
- Response Time : <500ms
- Insulation Resistance: 100M (Min)
- Output Method:
- Analog output: 0-4.5V
- Digital Output: High/Low level signal (you can adjust the threshold value by adjusting the potentiometer)
- Operating Temperature: 5℃~90℃
- Storage Temperature: -10℃~90℃
- Weight: 30g
- Adapter Dimensions: 38mm*28mm*10mm/1.5inches *1.1inches*0.4inches
-
Specification: Item name:NAZE32 REV6a Flight Controller CPU:STM32F 103CBT6 Sensors: MPU6500 USB To UART:CP2104 Height: 36mm Width: 36mm Weight: 6 grams (no headers, 8 grams with) Version:6 DOF and 10 DOF Features: Battery voltage monitoring Built-in FrSky telemetry converter Modern 32-bit processor (STM32 F103) running at 3.3V/72MHz. Onboard USB for setup and configuration Modern GUI for all operating systems, Baseflight Configurator
-
The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.Warning: Unlike most Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board.
-
This DSO138 digital oscilloscope kit adopts ARM Cortex-M3 processor and with 2.4-inch TFT screen. It's easy and reliable for circuit operation. It can display frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Features:This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.Adjustable vertical displacement, and with instructions.With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay).Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source.With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off.Short-circuit and open-circuit detection: can help the user find out the soldering error.TFT controller recognition function.
-
Input voltage- AC 0-220V 50/60 Hz / Output voltage- AC 10-220V adjustable (output voltage is less th Maximum power- 4000W (220V) / Adjustable voltage range- AC 0-220V Promise adjustable (with load cond starting 20V or so / Rated current- 9A / Maximum current- 18A
# Image shown is a representation only #