Based on TP4056, this includes two pieces of 3.7V lithium battery charger modules, one of which is Micro USB interface, the other is Mini USB interface. It is small size and light weight, especially for a single lithium battery charging. Features: - Input voltage: 4.5V ~ 5.5V - Input Interface: Micro USB port or Mini USB port - Charging method: linear charge - A full charge voltage: 4.2V - Charge Current: 1A (default), modify the onboard resistor to adjust the charging current according to the table below. - Charging accuracy: 1.5% - Charging indicator: Red LED charging, Blue LED full. - Output Reverse: lithium batteries can not be reversed.

Product Description: The MPU6050 devices combine a 3-axis gyroscope and a 3-axis accelerometer on the same silicon together with an onboard Digital Motion Processor (DMP) capable of processing complex 9-axis MotionFusion algorithms. The parts’ integrated 9-axis MotionFusion algorithms access external magnetometers or other sensors through an auxiliary master I2C bus, allowing the devices to gather a full set of sensor data without intervention from the system processor. The devices are offered in the same 4x4x0.9 mm QFN footprint and pinout as the current MPU-3000? family of integrated 3-axis gyroscopes, providing a simple upgrade path and making it easy to fit on space constrained boards. The InvenSense Motion Apps Platform that comes with the MPU-6050 abstracts motion-based complexities, offloads sensor management from the operating system and provides a structured set of APIs for application development. For precision tracking of both fast and slow motions, the parts feature a user-programmable gyro full-scale range of ±250, ±500, ±1000, and ±2000°/sec (dps) and a user-programmable accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g.

Allsen Rx – Tx Kit consists of a RF Transmitter and a Receiver. This kit is specially designed for using it in making wireless robots where one can press buttons provided on transmitter and move the robot in desired direction with a help of motors driven by motor driver circuit in receiver. Features:

• Buttons are provided in Transmitter Board to control motor directions.
• In built motor driver circuit in Receiver Board.
• DIP switch for Address Selection.
• Power and Motor Enable switches.
• On board LED for power, motor and connection indication.
• Both Transmitter and Receiver have voltage regulators.

Description:

GH100 Miniature Microwave Motion Sensor is a X-Band Bi-Static Doppler transceiver module. Its built-in Dielectric Resonator Oscillator (DRO) and a pair of Microstrip patch antenna array, make it ideal for OEM usage in motion detection equipment. This module is ideally suitable for false alarms reduction in intruder detectors when work together with Passive Infrared (PIR) sensor. It can also be used for auto-door opening and vehicle speed measurement.

Features:

• Low current consumption
• CW or Pulse operation
• Flat profile
• Microwave-PIR motion detector
• Speed measurement
• Lighting control
• Long detection range
• Antenna Beam Pattern
• Azimuth

The DS1990A serial number IButton is a rugged data carrier that serves as an electronic registration number for automatic identification. Data is transferred serially through the 1-Wire protocol, which requires only a single data lead and a ground return. Every DS1990A is factory lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. The durable stainless-steel iButton package is highly resistant to environmental hazards such as dirt, moisture, and shock. Its compact coin-shaped profile is selfaligning with mating receptacles, allowing the DS1990A to be used easily by human operators.

It is a durable probe essential for outdoor use. This also comes with a green LED for directing users where to touch. The probe comes with a brass M18 x 1 nut for panel mounting. Since the body of the probe also forms the ground contact, the panel should be of non-conducting material to avoid ground loops. The 30cm cable with connector is provided for easy connection to the system microcontroller.

OP8 to DIP8 8 pin chip programmer adapter is wide body, 1.27 mm Pitch and 7.9 mm Width, this SOP8 / SOIC8 / SO8 8 pin ic socket support eeprom from width 200mil to 208mil, SOP8 to DIP8 8 pin IC socket will convert SOP8 into DIP8. Features:   1.  CNV SOP8、SOIC8、SO8 8 pin ic socket 2.  Tested before shipping 3.  Easy to use, support eeprom width 200mil-208mil 4.  Wide body SOP8 8 pin ic socket   Supported Devices (Wide): 1. Package:  SOP8、SOIC8、SO8 2. Pitch:  1.27 mm 3. Width: 7.9 mm (add pin width) 4. Width: 5.4 mm 5. SOP 8 Pin to DIP 8 Pin, Pitch: 2.54mm (100mil),  Width: 1.52cm (600mil)

This sensor takes a continuous reading of any obstacle and settles it at output in TTL form within 2ms. The sensor provides easy interface of 3-wire with power, ground and the output voltage. The sensor works on 5V input Features -Very Small in size -Less influence on the color of reflected objects, reflectivity -Industrial grade quality -Can detect colour difference from certain range -TTL output high whenever sensor senses a obstacle -Detecting distance of 3cm to 80cm -External control circuit unnecessary -Low cost -Has inbuilt lenses assembly and potentiometer to set range of the module -Output indication LED

Small size, low cost with patent's shock sensor 801S is a sensitivity shock sensor. Also have series shock sensor for industrial use.