-
Voltage : 3.3V to 5V Chipset : TSOP1838 37.9kHz Receiving distance : up to 18 m# Image shown is a representation only #
-
The TSL2561 is an inexpensive, yet sophisticated, light sensor. Unlike simpler sensors, like photoresistors and photodiodes, the TSL2561 incorporates both infrared and visible light sensors to better approximate the response of the human eye. Because the TSL2561 is an integrating sensor (it soaks up light for a predetermined amount of time), it is capable of measuring both very small and very large amounts of light. -
'- Board TP4056 lithium charge management chip - Mini USB head can link directly to the computer USB port charging - The charging board can also power supply from (IN and IN-) pin - Setting aside the the TEMP pin interface can be used as lithium battery temperature detection - Input voltage: 4V~8V - Maximum output charging current: 1000mA - D1 indicator lights on when in charging, D2 lights on when charging completed - English Manual/Spec: Yes - Great for DIY project -
Input interface: Type C / Current Protection: Yes Charging mode: Linear charging. / Current: 1A adjustable. Charge precision: 1.5%. / Input voltage: 4.5V-5.5V. / Full charge voltage: 4.2V.# Image shown is a representation only #
-
Based on TP4056, this includes two pieces of 3.7V lithium battery charger modules, one of which is Micro USB interface, the other is Mini USB interface. It is small size and light weight, especially for a single lithium battery charging. Features: - Input voltage: 4.5V ~ 5.5V - Input Interface: Micro USB port or Mini USB port - Charging method: linear charge - A full charge voltage: 4.2V - Charge Current: 1A (default), modify the onboard resistor to adjust the charging current according to the table below. - Charging accuracy: 1.5% - Charging indicator: Red LED charging, Blue LED full. - Output Reverse: lithium batteries can not be reversed. -
TowerPro SG92R Mini Servo 180° Motor E-881 Operating voltage: 3.0V~ 7.2V Weight: 9 gm Servo Plug: JR Stall torque @4.8V: 2.5kg-cm -
Tiny and lightweight with high output power. Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. It comes with a 3 horns (arms) and hardware. Specifications • Weight: 9 g • Dimension: 22.2 x 11.8 x 31 mm approx. • Stall torque: 1.8 kgf·cm • Operating speed: 0.1 s/60 degree • Operating voltage: 4.8 V (~5V) • Dead band width: 10 µs • Temperature range: 0 ºC – 55 ºC -
Weight: 55g Dimension: 40.7×19.7×42.9mm Stall torque: 10kg/cm (4.8v); 12kg/cm (6v) Operating speed: 0.23sec/60degree (4.8v); 0.2sec/60degree (6.0v) Operating voltage: 4.8 ~ 6.6v Temperature range: 0- 55deg Gear Type: Metal gear Dead band width: 1us Power Supply: Through External Adapter servo wire length: 32cm Servo Plug: JR (Fits JR and Futaba) servo arms &screws included and fit with Futaba servo arm It’s universal “S” type connector that fits most receivers. -
Specifications • Weight: 55 g • Dimension: 40.7 x 19.7 x 42.9 mm approx. • Stall torque: 9.4 kgf·cm (4.8 V ), 11 kgf·cm (6 V) • Operating speed: 0.17 s/60º (4.8 V), 0.14 s/60º (6 V) • Operating voltage: 4.8 V a 7.2 V • Running Current 500 mA – • Stall Current 2.5 A (6V) • Dead band width: 5 µs • Stable and shock proof double ball bearing design • Temperature range: 0 ºC – 4.8 V a 7.2 V – 900 mA (6V) double ball bearing design 55 ºC -
Specifications Modulation: Digital Torque: 4.8V: 130.54 oz-in (9.40 kg-cm) 6.0V: 152.76 oz-in (11.00 kg-cm) Speed: 4.8V: 0.20 sec/60° 6.0V: 0.16 sec/60° Weight: 1.94 oz (55.0 g) Dimensions: Length:1.60 in (40.7 mm) Width:0.78 in (19.7 mm) Height:1.69 in (42.9 mm) Gear Type: Metal Pulse Cycle: 1 ms Connector Type: JR -
Description: -Color: red. -Main chip: LM393. -Operating voltage: DC 5V. -Light weight design. -With single channel signal output. -Low level output signal used for human body touch sensor alarm. -Compatible with Arduino. -
Description
- The mini USB LED light is good for camping and desktop/laptop lighting .
- It is quite convenient,the light will turn on/off when you touch the back of the sensing area.
- the light can be dimmer when you touch the back of the sensing area.
- It is compatible with all standard USB plug device, such as power bank, car/mobile charger, desktop computer, laptop, etc.
-
Description TOP2011 USB Universal Programmer 100% is original one,Top2011 Eprom Programmer Supports Windows 98se/ME/2000/XP/Vista/Win7,TOP 2011 Universal Programmer is the best chip universal programmer TOP2011 USB Universal Programmer Features USB powered, 70mA~500mA, No AC/DC adapter needed. Support 2.5V~6.5V device. Over-current protection on all Pins. 40 pins self-lock sockets. Working with Windows XP/Vista/Win7(32-bit). Self-detecting the device’s manufacturer’s name and the type of IC. Topwin 2011 EEPROM programmer speciality 100% Brand New Model : TOP2011 40 pins self-lock sockets USB load testing (0 to 10 levels) Interface with PC , laptop or compatibles through USB1.1/2.0 port Self-detecting the device’s manufacturer’s name and the type of IC Provides over-current and over-voltage protection for safety of the chip and programmer hardware Support devices 2.5V~6.5V Power : < 2.5w (5v/500mA) Supports Windows 98/SE/ME/2000/XP/Vista/Win7
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
