-
W5500 TCP / IP SPI to LAN Ethernet Interface SPI to LAN / Ethernet Converter E-1014 80MHz high-speed SPI interface Built-in hardware TCPIP protocol stack, users need almost no knowledge of complex network protocols Support up to 8 Socket connections Support TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE protocol Integrated data link layer, physical layer Support power-down wake up Support high-speed serial peripheral interface (SPI mode 0~3) Internal 32K byte send and receive buffer Embedded 10BaseT/100BaseTX Ethernet Physical Layer (PHY) Support auto-negotiation (10/100-Based full/half-duplex) IP fragmentation is not supported 3.3V working voltage, I/O signal port 5V withstand voltage LED status display (full-duplex / half-duplex, network connection, network speed, active status) Ultra-small pin package for easily embedded applications Provide C application routines -
40 Wires Gray Flat Ribbon FRC Cable per 1 MTR CBL-75 IN STOCK- 40 Wires Gray Flat Ribbon FRC Cable - 30 MTR Roll Multistrand tin copper conductors Pvc Insulated Cores/Cross sec. area (in mm2)-0.127 Size-26 AWG Overall diameter-4.4 MM Max. Conductor Resistance (ohm/km) at 20-152.7 GREY Colour -
10mm Led Holder Plastic White Body– Red HRD-145 Size: 10mm Color: RED Head Shape: Round Lens Appearance : RED -
Illuminated Toggle Switch SPST 2 Pin ON-OFF RED TC-193 Product: Toggle Switch Circuit: ON-OFF Illuminated when the switch is in the ON position Rating: 20A 12V DC Requires a 15/32 - 1/2 (12.2mm) diameter mounting hole Size: 6.7 x 5 x 1.5cm (approx) Led colour: RED -
Illuminated Toggle Switch SPST 2 Pin ON-OFF BLUE TC-192 Product: Toggle Switch Circuit: ON-OFF Illuminated when the switch is in the ON position Rating: 20A 12V DC Requires a 15/32 - 1/2 (12.2mm) diameter mounting hole Size: 6.7 x 5 x 1.5cm (approx) Led colour: BLUE -
D Type Battery Holder For 4 Battery Dual Back To Back with 130mm Leads RBH-55 Dimensions: 70 mm x 68mm x 63mm -
Arduino compatible Uno board, ATmega328PB, USB-C, extra IO E-1013 Features Microcontroller: ATmega328PB Bootloader: Minicore Clock frequency: 16 MHz Logic level: 5 V additional IO pins additional IO pins digital pins: 16 (6 with PWM) USB-C interface Specifications current (DC) per I/O pin: 40 mA 32 kB memory (2 kB for bootloader) 2 kB SRAM EEPROM: 1 kB Operating voltage: Vin-PIN: 7 - 12 V / USB Type-C: 5 V Current consumption: 20 Ma -
LM2577SLM2596S Automatic Buck-boost Power Module E-1012 Automatic buck-boost: Output remains stable across varying input voltages. Wide voltage range: Input 3.5V–28V, Output 1.25V–26V. Dual chip design: LM2577S LM2596S for improved performance. Solar panel compatible: Ideal for renewable energy setups. Compact and lightweight: Only 28.7g with 53x38x15 mm footprint. Easy adjustment: Onboard potentiometer for precise voltage control. -
LILYGO® TTGO T8 V1.8 ESP32 - WROVER 8MB PSRAM TF CARD WiFi Bluetooth Expand Module Development Board E-1011 Espressif (Espressif) official ESP32-WROVER module The last ESP32 version: rev1 Wireless Internet Bluetooth 4MB flash memory 8Mb PSRAM Lithium battery interface, 500mA current charging MicroSD memory card slot supports SPI mode, SD, usb and VIN (five doors) are all 1A fuse -
Gravity I2C 4-20mA DAC Module Arduino Compatible-DFROBOT E-1010 Chip Type: GP8302 Input Signal Range: 12Bit, 0x000-0xFFF (0-25mA) Input I2C Signal High Level: 2.7V-5V Power Supply: 18V-24V (24V recommended) Accuracy: 0.5% before calibration, 0.2% after calibration Power Consumption: <5mA Start-up Time: <2ms Operating Temperature: -40°C to 125°C Load Resistance: Maximum 450Ω load capacity for 18V power supply, maximum 750Ω for 24V Output Current: 0-25mA I2C Address: 0x58
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
