Rajiv Electronics

YOUR PARTNER IN TECHNOLOGY SOLUTIONS

Rajiv Electronics

YOUR PARTNER IN TECHNOLOGY SOLUTIONS

Discount-For bulk orders kindly email us on (rajiv2digital@gmail.com). We will provide you the best possible discount.
  • Item: Pack of 24 Super Bright 12V White Piranha LED Panel Energy Saving Board Light Key Feature: Super bright Piranha LED light board Light board four corners with a fixed screw hole, easy fixed Lamp beads: 24 Operating voltage: 10V-14V (Recommended 12V DC) Operating Current: 160mA Rated Power: about 1.6W Life: about 50000-80000 hours Beam Angle: astigmatism (about 150 °) Light Color: White Dimensions: approx. 80 * 28mm (L*W)
  • General Description The DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC) with an integrated temperaturecompensated crystal oscillator (TCXO) and crystal. The device incorporates a battery input, and maintains accurate timekeeping when main power to the device is interrupted. The integration of the crystal resonator enhances the long-term accuracy of the device as well as reduces the piece-part count in a manufacturing line. The DS3231 is available in commercial and industrial temperature ranges, and is offered in a 16-pin, 300-mil SMD package.
  • ESP8266 ESP-12E Wireless WIFI Module

    SKU: E-333 135.00 +GST
    ESP-12E WiFi module is developed by Ai-thinker Team. core processor ESP8266 in smaller sizes of the module encapsulates Tensilica L106 integrates industry-leading ultra low power 32-bit MCU micro, with the 16-bit short mode, Clock speed support 80 MHz, 160 MHz, supports the RTOS, integrated Wi-Fi MAC/BB/RF/PA/LNA, on-board antenna. The module supports standard IEEE802.11 b/g/n agreement, complete TCP/IP protocol stack. Users can use the add modules to an existing device networking, or building a separate network controller. ESP8266 is high integration wireless SOCs, designed for space and power constrained mobile platform designers. It provides unsurpassed ability to embed Wi-Fi capabilities within other systems, or to function as a standalone application, with the lowest cost, and minimal space requirement.
  • The kit contains:
    1. JoyStick
    2. Flame Sensor
    3. RGB LED
    4. Heartbeat Sensor
    5. Light Cup
    6. Hall Magnetic Sensor
    7. Relay
    8. Linear Hall Sensor
    9. SMD RGB
    10. 7 Color Flash
    11. Tilt Switch
    12. Temperature Sensor
    13. Big Sound Sensor
    14. Touch Sensor
    15. Two-Color LED
    16. Laser Emitter
    17. Ball Switch
    18. Analog Temperature Sensor
    19. Small Sound Sensor
    20. Digital Temperature Sensor
    21. Two-Color LED (small)
    22. Button
    23. Photoresistor
    24. IR Emission
    25. Tracking Sensor
    26. Buzzer
    27. Reed Switch
    28. Shock Sensor
    29. Temperature And Humidity Sensor
    30. IR Receiver
    31. Avoidance Sensor
    32. Passive Buzzer
    33. Mini Reed
    34. Rotary Encoders
    35. Analog Hall Sensor
    36. Tap Module
    37. Light Blocking
  • SOP28 to DIP28 28 pin IC socket will convert SOP28 into DIP28, SOP28 / SOIC28 / SO28 IC Programmer Adapter is 1.27 mm Pitch and 7.5 mm Width, SOP28 8 pin programmer adapter. SOP28 to DIP28 28 pin IC socket SOIC28 IC adapter. Features: 1.  CNV SOP28、SOIC28、SO28 28 pin ic socket 2.  Tested before shipping 3.  Easy to use
  • OP8 to DIP8 8 pin chip programmer adapter is wide body, 1.27 mm Pitch and 7.9 mm Width, this SOP8 / SOIC8 / SO8 8 pin ic socket support eeprom from width 200mil to 208mil, SOP8 to DIP8 8 pin IC socket will convert SOP8 into DIP8. Features:   1.  CNV SOP8、SOIC8、SO8 8 pin ic socket 2.  Tested before shipping 3.  Easy to use, support eeprom width 200mil-208mil 4.  Wide body SOP8 8 pin ic socket   Supported Devices (Wide): 1. Package:  SOP8、SOIC8、SO8 2. Pitch:  1.27 mm 3. Width: 7.9 mm (add pin width) 4. Width: 5.4 mm 5. SOP 8 Pin to DIP 8 Pin, Pitch: 2.54mm (100mil),  Width: 1.52cm (600mil)
  • DS9092+ iButton Probe

    SKU: E-304 120.00 +GST
    It is a durable probe essential for outdoor use. This also comes with a green LED for directing users where to touch. The probe comes with a brass M18 x 1 nut for panel mounting. Since the body of the probe also forms the ground contact, the panel should be of non-conducting material to avoid ground loops. The 30cm cable with connector is provided for easy connection to the system microcontroller.
  • The DS1990A serial number IButton is a rugged data carrier that serves as an electronic registration number for automatic identification. Data is transferred serially through the 1-Wire protocol, which requires only a single data lead and a ground return. Every DS1990A is factory lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. The durable stainless-steel iButton package is highly resistant to environmental hazards such as dirt, moisture, and shock. Its compact coin-shaped profile is selfaligning with mating receptacles, allowing the DS1990A to be used easily by human operators.
  • MQ-135 is sensitive air quality sensor that detects NH3, NOx, alcohol, benzene, smoke, CO2, etc. Heater voltage 5V, 31 ohm (40mA consumption) The board has digital and analog output.

    FEATURES

    • Detects NH3, NOx, alcohol, benzene, smoke, CO2, etc.
    • Operating voltage 5V
    • Operating current 40mA
    • Both digital and analog output
    • Popular sensor - a lot of examples available for different platforms
    • Port explanation : AO for analog output, DO for digital output, GND for ground, VCC for 5V voltage input
Go to Top