-
M12 3 Pin A Coded Male/Female Field Wireable Connector, Straight, Plastic Shell PG7 RCT-712 Configuration:3-pin, A-coded Orientation: Straight Contact Type: Male/Female Termination: Screw Joint Coupling Method: Threaded (M12x1) Shell Material: Plastic Thread Aperture: PG7 Ingress Protection: IP67 Durability: 500 Cycles Temperature Range: -25°C to 85°C -
M12 2 Pin A Coded Male/Female Field Wireable Connector, Straight, Plastic Shell PG7 RCT-711 Configuration:2-pin, A-coded Orientation: Straight Contact Type: Male/Female Termination: Screw Joint Coupling Method: Threaded (M12x1) Shell Material: Plastic Coupling Method: Threaded (M12x1) Shell Material: Plastic Thread Aperture: PG7 Ingress Protection: IP67 Durability: 500 Cycles Temperature Range: -25°C to 85°C -
SM15-80L 2 Phase 4 Wire Drive Stepper Motor Linear Screw RMT-76 Screw Diameter –3 mm Step Angle --18 degree Voltage -DC 4-9V 500mA Dimensions (LxWxH) -105x15x14mm Motor Type -2 phase 4 wire -
DART SENSORS WZ-S Formaldehyde sensor detection range:0.03-2ppm E-999 Detection Principle: Micro fuel cell Detectable Gas: HCHO Detection Range: 0-2 ppm (overload 10 ppm) Response Time (T90): < 40 seconds Recovery Time (T10): < 60 seconds Resolution: 0.001 ppm -
Nova SDS011 High Precision Laser Dust Sensor E-998 Output: PM2.5, PM10 Measuring Range: 0.0-999.9μg/m3 Input Voltage:3.7-5V Maximum Current: 100mA Sleep Current:2mA Response Time1 second Serial Data Output Frequency: 1 time/second Particle Diameter Resolution:≤0.3μm Relative Error:10% Temperature Range:-20~50°C Physical Size: 71mm*70mm*23mm -
Winsen ZH07 Laser Dust Sensor Module E-997 Product: Laser Dust Sensor model: ZH07 Working Voltage: 4.8V～5.5V(DC) Working Current: ＜120mA Weight: ＜30g -
DF Robot Fermion: MEMS Nitrogen Dioxide NO2 Gas Sensor SEN0574 E-996 Gas detected: NO2 Detection range: 0.1-10ppm Operating voltage: 3.3-5V Operating current: <20mA Output signal: Analog voltage Load resistance（RL）：4.7KΩ Sensitivity: R0(in air)/Rs(in 5ppm NO2) ≤ 0.5 Operating temperature: -10-50℃ Operating humidity: 15-90%RH (non-condensing) Lifespan: ≥5 years (in air) Dimension：13×13 x 2.5mm/0.0.51×0.51x0.1” -
SCD41 Gas Sensor Module CO2 Carbon Dioxide Temperature and Humidity Gas Sensor Module I2C E-995 Sensor: SCD41 CO2 measurement accuracy: ± (40 ppm + 5 % MV) Voltage range: 2.4-5.5 V Low power consumption operation, average <0.4 mA at 5 V, 1 measurement/5 minutes Measuring range: 400-5000 ppm Measuring range of the relative humidity: 0-95 % RH Typical relative humidity accuracy: 6 % RH Temperature range: -10 °C - 60 °C Temperature accuracy: 15 °C - 35 °C: ± 0.8 °C -10 °C - 60 °C: ± 1.5 °C Communication: I2C Size: 22 x 14 x 8 mm / 0.86 x 0.55 x 0.86 inch Interface definition: GND: Negative input VDD: Positive input SCL: I2C clock SDA: I2C data line -
1000uF 25V 105 Degree Electrolytic Capacitor 8x16mm C105-19 Tolerance – -±20% Voltage Rated— 25V Mounting Type -Radial, Through Hole Maximum Operating Temperature -105°C Lead Spacing – 5 mm Size / Dimension – 8.00mm / Height – Seated (Max)-16.00mm -
Steelgrip Insulation Electrical Tape – YELLOW RTL-375 Brand: Steelgrip Carrier: PVC film Adhesive: Rubber based Adhesive Adhesive side: Single Side Temperature Range : -40 to 125 degree C Colour : YELLOW SIZE—17 mm X 6 Mtr
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
