-
Yellow 1/23 Single Strand Hookup Wire 1 MTRSKU– CBL-36
IN STOCK- Yellow 1/23 Single Strand Hookup Wire - 92 MTR Roll
ATC Cond Size-0.61 mm/0.0240 inch Current Carrying Capacity-2.4 Amp Cross sec. Area -0.29 mm Max. Conductor Resistance (ohm/km) at 20°c-63.8 Solid Tin copper conductor Pvc Insulated Cores Size -23 AWG Used for low voltage application, jumpers, and bread boards -
Yellow 1/31 SWG Single Strand Wire 92 MTR+ CBL-57 Color: Yellow 1/31 - 92 MTR Wire Type - Single Strand Wire (Gitti Cable) Conductors- 1 Wire Gauge(SWG) - 31 Insulation Type - PVC -
Yellow 14/38 SWG PVC Tinned Copper Flexible Wire 1 MTRSKU– CBL-19
IN STOCK- Yellow 14/38 SWG PVC Tinned Copper Flexible Wire - 92 MTR Roll
ATC Cond. Size - 0.152 mm / 0.0060 inch Current Carrying Capacity -2 Amp Cross Sec.Area -0.25 mm Max. Conductor Resistance (ohm/km) at 20°c- 76.4 Nominal Insulation Thickness-0.55 mm Maximum Overall Dia -2%--1.75 mm temperature range -20 to 80 -
Yellow 23/38 SWG PVC Tinned Copper Flexible Wire 1 MTRSKU– CBL-26
IN STOCK- Yellow 23/38 SWG PVC Tinned Copper Flexible Wire - 92 MTR Roll
ATC Cond. Size - 0.152 mm / 0.0060 inch Current Carrying Capacity -3.3 Amp Cross Sec.Area -0.42 mm Max. Conductor Resistance (ohm/km) at 20°c- 46.5 Nominal Insulation Thickness-0.65 mm Maximum Overall Dia -2%--2.2 mm temperature range -20 to 80 -
Yellow 7/38 SWG PVC Tinned Copper Flexible Wire 1 MTR CBL-11IN STOCK- Yellow 7/38 SWG PVC Tinned Copper Flexible Wire - 92 MTR Roll
ATC Cond. Size - 0.152 mm / 0.0060 inch Current Carrying Capacity -1 Amp Cross Sec.Area -0.13 mm Max. Conductor Resistance (ohm/km) at 20°c- 152.7 Nominal Insulation Thickness-0.45 mm Maximum Overall Dia + -2%--1.35 mm temperature range -20 to +80 -
Yellow 7/40 SWG PVC Tinned Copper Flexible Wire 92 MTR CBL-63 Color: Yellow 7/38 - 92 MTR Strands: 7 -
This sensor sits in line with your water line and contains a pinwheel sensor to measure how much liquid has moved through it. There's an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry. The sensor comes with three wires: red (5-24VDC power), black (ground) and yellow (Hall effect pulse output). By counting the pulses from the output of the sensor, you can easily calculate water flow. Each pulse is approximately 2.25 milliliters. Note this isn't a precision sensor, and the pulse rate does vary a bit depending on the flow rate, fluid pressure and sensor orientation. It will need careful calibration if better than 10% precision is required. However, its great for basic measurement tasks! -
Features:- Light weight, small size, easy to install.
- Inlaid with stainless steel impeller shaft, durable wearable.
- Seal ring with the upper and lower force structure never leaks.
- Non-violent shock, and chemical erosion.
- Non-throwing or hitting.
- Mounted vertically, should not exceed 5 degrees inclination.
- Temperature of medium should not exceed 120 ℃.
-
Power consumption : 60W Adjustable soldering Iron temperature range : 90~480°C Heating up time : approximately 18s# Image shown is a representation only #
-
# Image shown is a representation only #
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
