-
Power dissipation:1w Power supply: 1.1-3.6V DC – typically 3.3V DC Resolution: 16bit Temperature measuring range: -40-125 ° C Temperature measurement resolution: 0.01 ° C Temperature measurement accuracy: ± 0.2 ° C Humidity measurement range: 0-100% RH Humidity measurement resolution: 0.01 RH Humidity measurement accuracy: ± 1.8% RH -
20000UF 50V KELTRON CAP-78 Tolerance 20% Operating Temperatures 40°C to +85°C Capacitor Dia 35 mm Capacitor height 95 mm -
W5500 TCP / IP SPI to LAN Ethernet Interface SPI to LAN / Ethernet Converter E-1014 80MHz high-speed SPI interface Built-in hardware TCPIP protocol stack, users need almost no knowledge of complex network protocols Support up to 8 Socket connections Support TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE protocol Integrated data link layer, physical layer Support power-down wake up Support high-speed serial peripheral interface (SPI mode 0~3) Internal 32K byte send and receive buffer Embedded 10BaseT/100BaseTX Ethernet Physical Layer (PHY) Support auto-negotiation (10/100-Based full/half-duplex) IP fragmentation is not supported 3.3V working voltage, I/O signal port 5V withstand voltage LED status display (full-duplex / half-duplex, network connection, network speed, active status) Ultra-small pin package for easily embedded applications Provide C application routines -
RFID Reader Modem TTL -
This is an infrared based sensor array which can be used in advanced line following and grid navigation robots. The array has 8 individual sensors placed next to each other. Each sensor has its own digital output and can sense the presence of a line and indicate it with a 5V logic output. On reading the the digital state of the eight sensors, the user can not only detect the line but also get to know how far the center of the robot is from the line. When all sensors sense the line, the robot is on an intersection. Features- Uses 8 sensors for best resolution.
- Great useful in building fast line following and grid navigating robots.
- Input Voltage: 5V DC.
- Comes with easy to use digital outputs that can be connected directly to microcontrollers.
- The array has mounting holes of 3mm diameter for easy mounting.
-
Bee Adapter is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated FT232RL IC, It can be used for programming or communicating with board which basic Arduino but without USB interface,like Sniffer Nano. On the other hand, you may connect your PC to various wireless applications via the BEE compatible modules. The adapter also support XBee module interface. -
Features: >The smallest Arduino Compatible breakout board measuring less than 1 square inch! >Support for the Arduino IDE 1.0 (OSX/Win/Linux). >Power via USB or External Source: 7V - 35V DC (12v or less recommended). >Automatic selection between 5V USB and External Source for Power. >On-board 500ma 5V Regulator. >On-board microUSB port for easy programming & power. >6 I/O Pins: 2 pins (P3 & P4) are tied to USB (This means if your program actively communicates over USB they will be in use. If your program does not actively communicate over USB you can use all 6 I/O pins after programming via USB). >8k Flash Memory (about 6k after bootloader). >Communication Protocols Supported: I2C and SPI T. >PWM on 3 pins (more possible with Software PWM). >ADC on 4 pins. >Power LED and Status LED on-board.
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
