-
This DC-DC Module is based on IC XL6009E1 which is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XL6009E1 core chip that offers superior performance over the first generation technology LM2577. XL6009 replaces LM2577 module as LM2577 is about to be phased out. -
Specification: -Voltage: 3.3V. -It's for 8 Pin NRF24L01 Module. -A simple socket board which is for NRF24L01 wireless module. -On-board AMS1117-3.3 chip. -It can be used with NRF24L01 wireless module. -Dimension: 26 x 19 x 12mm. -
This module size is only 11.2mm x 11mm. TEA 5767 supports I2C.Radio chip is controlled by writing 5 bytes one by one. During writing TEA5767 IC2 address is 0x60, reading – 0x61. Arduino IDE supports only 7 bit address ant last bite is assigned automatically, so in code 0x60 is used as address. -
This module could modulate your voice on the FM radio wave. And anyone who has a radio device could receive it. We build everything on this module, which makes it very easy to build a tiny radio station. We also reate library for Arduino to work with this module. We make everything easy for you. Feature : 1) I2C interface 5V TTL compatible 2) Arduino plug and play 3) Onboard MIC 4) VCC Input: 3.0V ~ 5.0V -
This development board uses the ATmega48 microcontroller for convenient interfacing with the NRF24L01 module. It also features an I2C communication interface that can be used for communication with other microcontrollers such as Arduino or for connecting other peripherals directly to this board. This module comes programmed with an I2C to SPI bridge which implements a convenient RF communication solution. With this module, users do not need to understand the NRF24L01 communication protocol which makes the building of NRF24L01 wireless application easier. This improves the efficiency of the project development process. This module is perfect for robots, remote controls, and remote sensing applications. Specifications Operating Voltage: 5 V (No short-circuit protection) Transfer Rate: 50 Bytes/second I2C/TWI Address: 0x47 (decimal 35) NRF24L01 Address: 0x34, 0x43, 0x10, 0x01, (from low to high) -
Product Features: 1. Toshiba TB6560AHQ chip - maximum 3.5 Adrive current, more powerful. 2. 1 - 1/16 microstep setting - higher accuracy, smoother operation. 3. Overload & over-current & over-temperature protection, full protection of your computer and peripheral equipment. 4. 4 files current settings can be set according to the user the actual current requirement. 5. Full closed-type optical isolation to protect the user's computer and equipment. 6. Professional design, two-stage signal processing, super anti-jamming. 7. Bipolar constant current chopper drive motor low-speed non-creeping phenomenon, noise, non-resonant region. 8. Four input control, you can set limit, emergency stop, which is divided into pairs of knives. -
Features: -Built from quality glass fiber and polyamide nylon. -Integrated PCB connections for direct soldering of your ESCs -Pre-threaded brass sleeves for all of the frame bolts. -Colored arms for orientation to keep you flying in the right direction. -Large mounting tabs on main frame bottom plate for easy camera mounting. -Easy assembly. Specs: Width: 450mm Height: 55mm Weight: 270g (w/out electronics) Motor Mount Bolt Holes: 16/19mm -
Features: -Input voltage: AC 110V-240V -Balance charge current: 850mA -Display: Green & Red LED -Case: Plastic -Max charge power:10W -Only charge for 2~3 series LiPo battery -
Yun Shield runs Open Source OpenWrt system and it is fully compatible with Arduino IDE v1.5.4 or later. Yun Shield is the ideally choice for Arduino Projects w Yun Shield is one of the most powerful shields for Arduino Board. Yun Shield is designed to solve the Internet connectivity and storage issue for Arduino Board. Yun Shield runs Open Source OpenWrt system (Same system as runs in Arduino Yun) and it is fully compatible with Arduino IDE v1.5.4 or later. Yun Shield is the ideally choice for Arduino Projects which require various internet connections and more storage. -
'-800×480 high resolution, touch control -Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) -Drivers provided (works with your own Raspbian/Ubuntu directly) -HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) -Back light control to lower power consumption. -High quality immersion gold surface plating.
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
