-
MQ-9 gas sensor has high sensitity to Carbon Monoxide, Methane and LPG. The sensor could be used to detect different gases contains CO and combustible gases, it is with low cost and suitable for different application. Character * Good sensitivity to CO/Combustible gas * High sensitivity to Methane, Propane and CO * Long life and low cost * Simple drive circuit Application * Domestic gas leakage detector * Industrial gas detector * Portable gas detector -
Features 1 Input voltage range:4 -40VDC 2 Output voltage range:1.25-37VDC adjustable 3 Output current:2A 4 voltmeter range: 0 to 40V, error 0.1V 5 Input reverse polarity protection 6 Built in output short protection function 7 Built in thermal shutdown function 8 L x W x H =6.1*3.4*12 cm 9 Weight: 22g 10 LED digital voltmeter tube, the accuracy is adjustable function, can be aimed at your multimeteradjustable accurate. 11 Press the rightkey to let the display show the input or output voltage. when the right OUT led light, it shows output, the left IN led show input. -
ADC Bit rate: 16 Bit. Interface Type: I2C. Channels: 4 Channel AN0 AN1 AN2 AN3 or 2 differential inputs. Input voltage: 2.0-5.5v. Channel input voltage :0-VDD. Continuous Mode: Only 150μA. Single-Shot Mode: Auto Shut-Down. PROGRAMMABLE DATA RATE:8sps-860sps. Input range programmed control, 7 types input ranges: -0.256V ~ 0.256V, -0.512V ~ 0.512V, -1.024V ~ 1.024V, -2.048V ~ 2.048V, -4.096V ~ 4.096 V, -6.144V ~ 6.144V. I2C 7-bit addresses between 0x48-0x4B. Size:18mm*28mm. Applications -Portable instrumentation. -Consumer goods. -Battery monitoring. -Temperature measurement. -Factory automation and process controls. -
Feature: *3.3V or 5.0V DC power supply. *MCU interface: SPI. *Main ADC chip: TM7705 (AD7705 chip is fully compatible) *LM285-2.5 external reference voltage. Part peers using low-end domestic TL-431 is not a number as a reference, temperature stability and accuracy of the level difference. Please sights. *The input circuit with a divided resistor and RC filter, enabling customers to change their own gain range. *Chip programmable gain amplifier with a gain range: 1-128 times. *Chip buffer amplifier input with direct connection Sensor. -
Specifications Processor- Broadcom BCM2387 chipset. 1.2GHz Quad-Core ARM Cortex-A53 802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE) GPU -Dual Core VideoCore IV® Multimedia Co-Processor. Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode. Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure Memory- 1GB LPDDR2 Operating System- Boots from Micro SD card, running a version of the Linux operating system or Windows 10 IoT Dimensions- 85 x 56 x 17mm Power- Micro USB socket 5V1, 2.5A Connectors: *Ethernet- 10/100 BaseT Ethernet socket *Video Output- HDMI (rev 1.3 & 1.4 *Composite RCA (PAL and NTSC) *Audio Output -Audio Output 3.5mm jack, HDMI *USB- 4 x USB 2.0 Connector *GPIO Connector- 40-pin 2.54 mm (100 mil) expansion header: 2x20 strip *Providing 27 GPIO pins as well as 3.3 V, 5 V and GND supply lines *Camera Connector- 15-pin MIPI Camera Serial Interface (CSI-2) *Display Connector- Display Serial Interface (DSI) 15 way flat flex cable connector with two data lanes and a clock lane *Memory Card Slot- Push/pull Micro SDIO -
*Heating voltage: 5 ± 0.2V (AC · DC). *Current :5-10mA. *Detectable concentration range: PH0-14. *Test the temperature range :0-80 °. *Response time: ≤ 5S. *Stabilization time: ≤ 60S. *Component Power: ≤ 0.5W. *Working temperature: -10 ~ 50 ° (nominal temperature 20 °). *Humidity: 95% RH (nominal humidity 65% RH). *Life: 3 years. *Size: 42mm × 32mm × 20mm. -
1): Wide Input Range This product AD620 zoom, you can zoom microvolts mV, more accurate than the market LM358 amplification, better linearity. 2): magnification using potentiometer amplify the input signal, magnification up to 10,000 times, can be adjusted only via a potentiometer. 3): Wide power supply range 7-24V DC power supply can be entered Performance: -Wide supply voltage range: 7-24V input -Ultra-low input offset voltage: 50μV maximum. -Ultra Low Input Bias Current: 1.0nA (maximum). -CMRR: 100dB -Ultra-low input offset voltage drift: 0.6μV / (maximum). -Ultra-stable, time: 2μV / month maximum -
Features: -Support CAN V2.0B specification, the communication speed 1Mb / S. -0 to 8-byte data field. -Three frames - standard, expand the frame and remote. -DC5V power supply module & SPI interface protocol control. -120 ohm termination resistors, Impedance matching, ensure drive capacity, long-distance data transmission against signal radiation. -Module dimensions - 4 x 2.8 cm / 1.57 x 1.1" (approx.). -Working Current - typ. 5mA & 1μA standby current. -Working Temperature - (Industrial grade) -40 ℃- 85℃. -
Specifications: Operating Voltage:5V Total resistance:100K ohm Port voltage:-5V~5V Taps:100 Interface: CS, U/D, INC Resistance increase mode: Linear Working current:3mA Packages/temp (℃): 8SOIC/-40~85 -
This is an IC Test Clip for 8-pin small outline integrated circuits (SOIC). This test clip assures a secure connection to all chip leads on an 8-pin SMD SOIC and provides hands-free testing. On this test clip you will find two sets of gold plated contacts, upper contacts to attach wiring and lower contacts for an 8-pin IC. Simply place your choice of IC in the lower contacts and attach female terminated jumper wires to the 0.1" spaced upper contacts and you are ready to start testing! -
Feature: *Operating voltage: 5V. *On-board MAX485 chip. *A low power consumption for the RS-485 communication. *Slew-rate limited transceiver. *5.08mm pitch 2P terminal. *Convenient RS-485 communication wiring. *All pins of chip have been lead to can be controlled through the microcontroller. *Board size: 44 x 14mm. -
The CC3D provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes.CC3D CopterControl Hardware Features-Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.-3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.-Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.-Software support for Windows, Mac and Linux.-Direct high speed USB support with no drivers required, a truly plug and play device.-Spektrum satellite receiver support.-Futaba S-BUS hardware support.-Innovative Flexi-port technology for superior port flexibility.-4Mbits on-board EEPROM for configuration storage. -
Specification: Item name:NAZE32 REV6a Flight Controller CPU:STM32F 103CBT6 Sensors: MPU6500 USB To UART:CP2104 Height: 36mm Width: 36mm Weight: 6 grams (no headers, 8 grams with) Version:6 DOF and 10 DOF Features: Battery voltage monitoring Built-in FrSky telemetry converter Modern 32-bit processor (STM32 F103) running at 3.3V/72MHz. Onboard USB for setup and configuration Modern GUI for all operating systems, Baseflight Configurator
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
