-
Input Voltage: 110 - 260V (AC) power supply Output Voltage: ±0.2 - 24V(DC) Maximum Output Current: < 500 mA (24 VDC) # Image shown is a representation only #
-
# Image shown is a representation only #
Allows your microcontroller project to keep track of time even if it is reprogrammed, or if the power is lost. Perfect for data logging, clock-building, time stamping, timers and alarms, etc -
Operating voltage- 2.5-5.5VDC Operating current- 100mA (max) I2C address- 0x20 (default) can be changed by soldering A1 and selection pads A2# Image shown is a representation only #
-
The PCF8591 is a single-chip, single-supply low-power 8-bit CMOS data acquisition device with four analog inputs, one analog output and a serial I2C-bus interface. Three address pins A0, A1 and A2 are used for programming the hardware address, allowing the use of up to eight devices connected to the I2C-bus without additional hardware. Address, control and data to and from the device are transferred serially via the two-line bidirectional I2C-bus. -
PDB-XT60 with BEC 5V and 12V E-930 4-layers and 1.6mm PCB Built-in XT60 Socket Total 6 pairs ESC solder tabs are fit for H or X type frame Regulated 5V and 12V outputs Short circuit tolerant Input voltage range: 9 – 18V DC (3S-4S Li Poly operation) Output continuous current: 25Ax4 or 15Ax6 Output Peak current (10 seconds/minute): 30Ax4 or 20Ax6 Short-circuit tolerant: 5 seconds/minute -
Power Connector Type 6-Pin / Voltage 12 Volts Wattage 72 Watts Cooling Method Air # Image shown is a representation only # -
MAX VOLTAGE - 7.6 V MAX CURRENT – 3.9 AMP MAX Colling Capcity - 17.9W# Image shown is a representation only #
-
Supports multiple PIC18F/16F 40 Pin MCUs Supports PIC18F458, PIC18F45550, PIC16F877A Supports PIC Kit 3/3.5 Connector for Programming Connectors for 16 X 2 LCD and LM35/10K pot Analog Input. With UDB Headers for Studying Embedded Systems, Project Development & Embedded/IoT based Product Prototyping by attaching it to the UDB. 2 Keys for Digital Input and 1 LED attached with Output Pin. USB C connector for powering board 5V Phone Charger -
Support PIC18F452/458, PIC18F4520/4580, PIC16F877A (supports Other PIC18F/16F Compitable MCU's ) 10k Pot Connector for Analog I/P. Lm35 Temperature Sensor Connector 4 X 4 Keypad / 8 LED Fits 16 X 2 LCD Module Connector. 2 Seven Segment Display. -
K150 is the latest of a low-cost high-performance PIC programmer, support most popular PIC chip burning Write, read, encryption and other functions, use a high-speed USB communication, ultra-fast programming, programming quality is stable and reliable. (Speed Average PICSTART 3-5 times) fully automatic programming verification; with 40pin DIP programmer seat, direct programming 8pin-40pin DIP chip; outside 8pin-40 pin chip software compatible board the ICSP interface online download; The Windows98 and Windows2000/NT, Windows XP operating system; software will constantly with the PIC's new device Upgrade. Master chip retains DIP package with seat!
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
