-
Supply voltage: DC 4.2 6.0V / Working current: 50mA (typical) /Peak current: 80mA Fingerprint image input time: <0.3 seconds /Window area: 14×18 mm Matching mode:1: 1 and 1:N / Characteristic file size: 256 bytes / Template size: 512 bytes / Storag# Image shown is a representation only #
-
The operating voltage is 3.3V High sensitivity: as low as-129dBm Support FSK, GFSK, and LoRa® modulation mode# Image shown is a representation only #
-
The rain sensor module is an easy tool for rain detection. It can be used as a switch when raindrop falls through the raining board and also for measuring rainfall intensity. The module features, a rain board and the control board that is separate for more convenience, power indicator LED and an adjustable sensitivity though a potentiometer. The analog output is used in detection of drops in the amount of rainfall. Connected to 5V power supply, the LED will turn on when induction board has no rain drop, and DO output is high. When dropping a little amount water, DO output is low, the switch indicator will turn on. Brush off the water droplets, and when restored to the initial state, outputs high level. -
Raspberry Pi / Arduino Uno R4/R3/UNO Mega 2560/400/830 Points Breadboard Platform E-937 Compatibility: Compatible with Raspberry Pi 5/4B/3B+/3B/2B/B+, Arduino Uno, Mega2560, also support both 400 points breadboard and 830 points breadboard Access to All Consumer Ports: TF card, HDMI and USB cords, very convenient for your DIY projects Portable, easy to move, carry, this RAB holder is stable to fixed on the table for your needs. With 4pcs rubber feet to stick at the bottom for non-slip purpose Excellent tool in education and DIY project for Raspberry Pi and Arduino UNO Mega 2560 -
- Input Current: 0.5A maximum
- 96-230Vac operating input range
- USB-C connection goes straight into your Raspberry Pi
# Image shown is a representation only #
-
The official Raspberry Pi 3 case in a stunning Red & white design Optional clip-on lid provides protection but can be removed if using a HAT All primary ports (including micro SD) accessible Removable side plate allows access to those wonderful GPIO pins Snug and secure fit. -
Specifications Processor- Broadcom BCM2387 chipset. 1.2GHz Quad-Core ARM Cortex-A53 802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE) GPU -Dual Core VideoCore IV® Multimedia Co-Processor. Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode. Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure Memory- 1GB LPDDR2 Operating System- Boots from Micro SD card, running a version of the Linux operating system or Windows 10 IoT Dimensions- 85 x 56 x 17mm Power- Micro USB socket 5V1, 2.5A Connectors: *Ethernet- 10/100 BaseT Ethernet socket *Video Output- HDMI (rev 1.3 & 1.4 *Composite RCA (PAL and NTSC) *Audio Output -Audio Output 3.5mm jack, HDMI *USB- 4 x USB 2.0 Connector *GPIO Connector- 40-pin 2.54 mm (100 mil) expansion header: 2x20 strip *Providing 27 GPIO pins as well as 3.3 V, 5 V and GND supply lines *Camera Connector- 15-pin MIPI Camera Serial Interface (CSI-2) *Display Connector- Display Serial Interface (DSI) 15 way flat flex cable connector with two data lanes and a clock lane *Memory Card Slot- Push/pull Micro SDIO -
Sale!
- All primary ports (including micro-SD) accessible
- Anti-slip feet keeps your Raspberry Pi 4 stable
- Removable side plate allows access to those wonderful GPIO pins
# Image shown is a representation only #
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
