-
This module described here is based on ADS9850, a CMOS, 125MHz, and Complete DDS Synthesizer. The AD9850 is a highly integrated device that uses advanced DDS technology coupled with an internal high speed, high performance, D/A converter and comparator, to form a complete digitally programmable frequency synthesizer and clock generator function. All the external components which are needed are integrated on the board and the designer don’t need to care more about the detailed design of ADS9850. The designer only needs to add the power and control signals to this module to driver this module
-
It is the Third recording module developed , this version is distinctly improved in the acoustic fidelity relative to the first and second version.
- Built-in microcontroller serial communication interface
- 3V single-supply operation, low power consumption
- Multi-information processing
- Working current 25-30mA, to maintain current 1μA
- Information is not power to save 100 years (typical)
- High-quality, natural voice reduction technology
- 10 million times the recording period (typical)
- Automatic squelch
- Free adjustment of the clock chip, the external clock can be selected
-
The MSP-430 LaunchPad is an easy-to-use flash programmer and debugging tool that provides everything you need to start developing on MSP430 Value Line devices. It includes a DIP socketed target board with integrated emulation to quickly program and debug MSP430 Value Line devices in-system through the Spy Bi-Wire (2-wire JTAG) protocol. The Flash memory can be erased and programmed in seconds with no external power supply required due to the MSP430's ultra-low power Flash technology. The LaunchPad interfaces MSP430 devices to an integrated software environment such as Code Composer Studio Version 4 or IAR Embedded Workbench. These IDEs are free and unrestricted on MSP430 Value Line devices. The LaunchPad supports all MSP430G2xx Flash parts in a 14 or 20-pin DIP package.
-
The GP2Y0A710K infrared sensor is a new version of GP2Y0A700K which takes a continuous distance reading and reports the distance as an analog voltage with a distance range of 1m (39.3") to 5.5m (216.5"). The interface is 5-wire JST connector (included with pins) with dual Vcc, dual Gnd, and a single output voltage. Power, ground and signal wiring is enough to read a continuous analog voltage representing distance. A software lookup table can be implemented to translate the voltages to distances.
-
The MPX2100 series device is a silicon piezoresistive pressure sensor providing a highly accurate and linear voltage output — directly proportional to the applied pressure. The sensor is a single, monolithic silicon diaphragm with the strain gauge and a thin–film resistor network integrated on–chip. The chip is laser trimmed for precise span and offset calibration and temperature compensation. Features • Temperature Compensated Over 0°C to 85°C • Easy–to–Use Chip Carrier Package Options • Available in Absolute, Differential and Gauge Configurations • Ratiometric to Supply Voltage • ±0.25% Linearity (MPX2100D) Application Examples • Pump/Motor Controllers • Robotics • Level Indicators • Medical Diagnostics • Pressure Switching • Barometers • Altimeters
-
1): Wide Input Range This product AD620 zoom, you can zoom microvolts mV, more accurate than the market LM358 amplification, better linearity. 2): magnification using potentiometer amplify the input signal, magnification up to 10,000 times, can be adjusted only via a potentiometer. 3): Wide power supply range 7-24V DC power supply can be entered Performance: -Wide supply voltage range: 7-24V input -Ultra-low input offset voltage: 50μV maximum. -Ultra Low Input Bias Current: 1.0nA (maximum). -CMRR: 100dB -Ultra-low input offset voltage drift: 0.6μV / (maximum). -Ultra-stable, time: 2μV / month maximum
-
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip (datasheet). The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top. The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega
-
MQ-136-Hydrogen Sulfide Gas Sensor Module E-869 Dual signal output (analog output and TTL level output) The TTL output effective signal is low. Analog output 0 ~ 5V voltage, the higher the concentration the higher the voltage. Good sensitivity to hydrogen sulfide, liquefied gas, natural gas, city gas, and smoke. with long service life and reliable stability fast response recovery characteristics