-
1): Wide Input Range This product AD620 zoom, you can zoom microvolts mV, more accurate than the market LM358 amplification, better linearity. 2): magnification using potentiometer amplify the input signal, magnification up to 10,000 times, can be adjusted only via a potentiometer. 3): Wide power supply range 7-24V DC power supply can be entered Performance: -Wide supply voltage range: 7-24V input -Ultra-low input offset voltage: 50μV maximum. -Ultra Low Input Bias Current: 1.0nA (maximum). -CMRR: 100dB -Ultra-low input offset voltage drift: 0.6μV / (maximum). -Ultra-stable, time: 2μV / month maximum -
Features: -Support CAN V2.0B specification, the communication speed 1Mb / S. -0 to 8-byte data field. -Three frames - standard, expand the frame and remote. -DC5V power supply module & SPI interface protocol control. -120 ohm termination resistors, Impedance matching, ensure drive capacity, long-distance data transmission against signal radiation. -Module dimensions - 4 x 2.8 cm / 1.57 x 1.1" (approx.). -Working Current - typ. 5mA & 1μA standby current. -Working Temperature - (Industrial grade) -40 ℃- 85℃. -
Specifications: Operating Voltage:5V Total resistance:100K ohm Port voltage:-5V~5V Taps:100 Interface: CS, U/D, INC Resistance increase mode: Linear Working current:3mA Packages/temp (℃): 8SOIC/-40~85 -
*Heating voltage: 5 ± 0.2V (AC · DC). *Current :5-10mA. *Detectable concentration range: PH0-14. *Test the temperature range :0-80 °. *Response time: ≤ 5S. *Stabilization time: ≤ 60S. *Component Power: ≤ 0.5W. *Working temperature: -10 ~ 50 ° (nominal temperature 20 °). *Humidity: 95% RH (nominal humidity 65% RH). *Life: 3 years. *Size: 42mm × 32mm × 20mm. -
Features 1 Input voltage range:4 -40VDC 2 Output voltage range:1.25-37VDC adjustable 3 Output current:2A 4 voltmeter range: 0 to 40V, error 0.1V 5 Input reverse polarity protection 6 Built in output short protection function 7 Built in thermal shutdown function 8 L x W x H =6.1*3.4*12 cm 9 Weight: 22g 10 LED digital voltmeter tube, the accuracy is adjustable function, can be aimed at your multimeteradjustable accurate. 11 Press the rightkey to let the display show the input or output voltage. when the right OUT led light, it shows output, the left IN led show input. -
ADC Bit rate: 16 Bit. Interface Type: I2C. Channels: 4 Channel AN0 AN1 AN2 AN3 or 2 differential inputs. Input voltage: 2.0-5.5v. Channel input voltage :0-VDD. Continuous Mode: Only 150μA. Single-Shot Mode: Auto Shut-Down. PROGRAMMABLE DATA RATE:8sps-860sps. Input range programmed control, 7 types input ranges: -0.256V ~ 0.256V, -0.512V ~ 0.512V, -1.024V ~ 1.024V, -2.048V ~ 2.048V, -4.096V ~ 4.096 V, -6.144V ~ 6.144V. I2C 7-bit addresses between 0x48-0x4B. Size:18mm*28mm. Applications -Portable instrumentation. -Consumer goods. -Battery monitoring. -Temperature measurement. -Factory automation and process controls. -
Feature: *3.3V or 5.0V DC power supply. *MCU interface: SPI. *Main ADC chip: TM7705 (AD7705 chip is fully compatible) *LM285-2.5 external reference voltage. Part peers using low-end domestic TL-431 is not a number as a reference, temperature stability and accuracy of the level difference. Please sights. *The input circuit with a divided resistor and RC filter, enabling customers to change their own gain range. *Chip programmable gain amplifier with a gain range: 1-128 times. *Chip buffer amplifier input with direct connection Sensor. -
Specifications Processor- Broadcom BCM2387 chipset. 1.2GHz Quad-Core ARM Cortex-A53 802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE) GPU -Dual Core VideoCore IV® Multimedia Co-Processor. Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode. Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure Memory- 1GB LPDDR2 Operating System- Boots from Micro SD card, running a version of the Linux operating system or Windows 10 IoT Dimensions- 85 x 56 x 17mm Power- Micro USB socket 5V1, 2.5A Connectors: *Ethernet- 10/100 BaseT Ethernet socket *Video Output- HDMI (rev 1.3 & 1.4 *Composite RCA (PAL and NTSC) *Audio Output -Audio Output 3.5mm jack, HDMI *USB- 4 x USB 2.0 Connector *GPIO Connector- 40-pin 2.54 mm (100 mil) expansion header: 2x20 strip *Providing 27 GPIO pins as well as 3.3 V, 5 V and GND supply lines *Camera Connector- 15-pin MIPI Camera Serial Interface (CSI-2) *Display Connector- Display Serial Interface (DSI) 15 way flat flex cable connector with two data lanes and a clock lane *Memory Card Slot- Push/pull Micro SDIO -
The TSL2561 is an inexpensive, yet sophisticated, light sensor. Unlike simpler sensors, like photoresistors and photodiodes, the TSL2561 incorporates both infrared and visible light sensors to better approximate the response of the human eye. Because the TSL2561 is an integrating sensor (it soaks up light for a predetermined amount of time), it is capable of measuring both very small and very large amounts of light. -
1, AO, analog output, real-time output voltage signal of the microphone 2, DO, when the sound intensity reaches a certain threshold, the output signal [high and low threshold - Sensitivity adjustment by potentiometer] Module features: 1, there is mounting screw holes of 3mm. 2, using the 5v DC power supply. 3, the analog output. 4, there is a threshold level output flip. 5, High sensitivity microphone, high sensitivity. 6, a power indicator light. 7, the comparator output indicator lamp. -
Multi function shield Features -4 digit 7-segment LED display module driven by two serial 74HC595’s. -4 LED’s. -10K potentiometer. -3 x push buttons. -Piezo buzzer. -DS18B20 temperature sensor interface (not included). -Infrared receiver interface. -Serial interface header for connection to serial modules. -
MQ-9 gas sensor has high sensitity to Carbon Monoxide, Methane and LPG. The sensor could be used to detect different gases contains CO and combustible gases, it is with low cost and suitable for different application. Character * Good sensitivity to CO/Combustible gas * High sensitivity to Methane, Propane and CO * Long life and low cost * Simple drive circuit Application * Domestic gas leakage detector * Industrial gas detector * Portable gas detector -
'-The lamp brightness can be adjusted by requirement,it is very to operate. -It can touch in medium protection,such glass,acrylic,plastic,ceramics and so on,which is very safe. -Wide application of voltage range,you can choose arbitrarily between 2.4V to 4.5V. -Anti power and phone interference,the EFT can reach above /-2KV;the touch response sensitivity and reliability will not affected by the close distance or multi-angle mobile phone interference. -Install: Needn’t to touch copper foil directly,the dimming can be processed across acrylic glass(above 3mm) or plastic. -Application:It can control LED module,light and so on.It is available for indoor LED,lighting lamp,DIY automotive lights dimming refit. -Function:Single touch,using the principle of capacitance touch .-The default function is switch,dimming,with brightness memories LED touch dimming.It will light slowly when turn on the lights,and become dark slowly when turn off,which effectively avoid the stimulation to eyes. -Dimming mode:Non-polar PWM dimming. -Wiring method:PCB board(VCC,GND) is power input,(LED , LED-) is connected with the LED lamps of positive and negative level (fingerprint) touch area, also can wire to lead out (the wiring should not be too long), copper skin area should be 2x3cm. With copper foil copper foil board module will side to the shell side.
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
