-
# Image shown is a representation only #
-
Features:- Light weight, small size, easy to install.
- Inlaid with stainless steel impeller shaft, durable wearable.
- Seal ring with the upper and lower force structure never leaks.
- Non-violent shock, and chemical erosion.
- Non-throwing or hitting.
- Mounted vertically, should not exceed 5 degrees inclination.
- Temperature of medium should not exceed 120 ℃.
-
Overview:- Small kit, easy to use .
- The LCD driver board is HDMI/VGA/2AV Reversing Driver board.
- This controller board supports Automatically Switch to AV2(Reversing View camera). Please connected ACC to 12V. Power Supply is NOT included.
- If you want to conect this screen to your Raspberry Pi, you need a AV Cable or a HDMI Cable, or if you have a HDMI TO VGA CABLE for Raspberry pi, you can use a VGA Cable to connect your Raspberry pi to this Screen.
- There is a sticker on the LCD screen. Please peel off before use.
-
Features: *Size: 50 x 26 x 15mm (excluding propellers) *Propeller diameter: 75mm *Operating voltage: 5V *L9110 driver can control reversing, with mounting holes, compatible steering rudder control, quality and high efficiency propeller. *Can easily blow out the flame lighters 20m away, can be used for fire fighting robot, it is essential for robot design and development. -
Features: Kits using ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display can be used as ARM test development board. Available source, Capable people can be secondary development on the basis of the suite, for example, it can be changed to Millivoltmeter, data loggers, and so on (we don't supply any technical support about that). Circuit is simple and the kit is inexpensive Description: PCB size: 117 x 76mm Screen size: 52 x 40mm Supply voltage: DC 9V -
This DSO138 digital oscilloscope kit adopts ARM Cortex-M3 processor and with 2.4-inch TFT screen. It's easy and reliable for circuit operation. It can display frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Features:This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.Adjustable vertical displacement, and with instructions.With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay).Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source.With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off.Short-circuit and open-circuit detection: can help the user find out the soldering error.TFT controller recognition function. -
# Image shown is a representation only #
Operating Voltage: 5 V Sonar Sensing Range: 25-450 cm Max. Sensing Range: 450 cm Frequency: 40 KHz -
Features
- Supports following Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
- Supports 8 independent sockets simultaneously
- Supports Power down mode
- Supports Wake on LAN over UDP
- Supports High Speed Serial Peripheral Interface(SPI MODE 0, 3)
- Internal 32Kbytes Memory for Tx/Rx Buffers
- 10BaseT/100BaseTX Ethernet PHY embedded
- Support Auto Negotiation (Full and half duplex, 10 and 100-based)
- Not support IP Fragmentation
- 3.3V operation with 5V I/O signal tolerance
- LED outputs (Full/Half duplex, Link, Speed, Active)
Specifications
- Module size: 55mm x 28mm
- Power supply: 3.3v /5v
- SPI clock frequency(MAX): 80M
- Work current(typ): 128mA
-
The BMP280 sensor is an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI. Features: - Pressure range: 300 ~ 1100hPa (altitude 9000 m ~ -500 m); - Working voltage: 1.71 - 3.6VDC; - Low power consumption: 4μA; - High precision: at low-power mode, the resolution is 0.06hPa (0.5 meters); - Temperature output; - Communication interface: I2C or SPI; typical application: - GPS precise navigation (dead reckoning, the upper and lower bridge detection, etc.); - indoor and outdoor navigation; - The weather forecast; - The vertical velocity indication (rise / sink speed); -
Description: -Brand new Black/White Line Hunting Sensor for Intelligent Car Tracing. -Features VCC/OUT/GND pin connector. -Output electrical level signal: Low level when detecting objects/ high level when no objects/0 or 1 decides if objects exist. -Power by 2.5-12V (cannot over 12V). -Perfect DIY parts for intelligent cars. -Color: Black panel -Working Current: 18-20mA at 5V -Package Dimensions: 77.0 x 49.0 x 12.0 mm -Weight: 5.0g -
Specification: Item name:NAZE32 REV6a Flight Controller CPU:STM32F 103CBT6 Sensors: MPU6500 USB To UART:CP2104 Height: 36mm Width: 36mm Weight: 6 grams (no headers, 8 grams with) Version:6 DOF and 10 DOF Features: Battery voltage monitoring Built-in FrSky telemetry converter Modern 32-bit processor (STM32 F103) running at 3.3V/72MHz. Onboard USB for setup and configuration Modern GUI for all operating systems, Baseflight Configurator -
W5500 Ethernet shield is designed using the WIZnet W5500 chip. It supports both 3.3V & 5V. This Ethernet Shield is compatible with Arduino and ARM embed Platform. Features -Suppport 3.3V / 5V. -High Speed Ethernet controller W5500 chip. -SPI interface. -Internal 32Kbytes Tx/Rx buffer. -10/100 Ethernet PHY embedded. -Support Auto Negotiation (Full / Half duplex, 10 / 100-based). -Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE. -User Selectable GPIO pin. -Support SD-card slot for storage. -Support I2C, UART interface. -
This is an IC Test Clip for 8-pin small outline integrated circuits (SOIC). This test clip assures a secure connection to all chip leads on an 8-pin SMD SOIC and provides hands-free testing. On this test clip you will find two sets of gold plated contacts, upper contacts to attach wiring and lower contacts for an 8-pin IC. Simply place your choice of IC in the lower contacts and attach female terminated jumper wires to the 0.1" spaced upper contacts and you are ready to start testing! -
Feature: *Operating voltage: 5V. *On-board MAX485 chip. *A low power consumption for the RS-485 communication. *Slew-rate limited transceiver. *5.08mm pitch 2P terminal. *Convenient RS-485 communication wiring. *All pins of chip have been lead to can be controlled through the microcontroller. *Board size: 44 x 14mm. -
The CC3D provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes.CC3D CopterControl Hardware Features-Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.-3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.-Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.-Software support for Windows, Mac and Linux.-Direct high speed USB support with no drivers required, a truly plug and play device.-Spektrum satellite receiver support.-Futaba S-BUS hardware support.-Innovative Flexi-port technology for superior port flexibility.-4Mbits on-board EEPROM for configuration storage. -
1): Wide Input Range This product AD620 zoom, you can zoom microvolts mV, more accurate than the market LM358 amplification, better linearity. 2): magnification using potentiometer amplify the input signal, magnification up to 10,000 times, can be adjusted only via a potentiometer. 3): Wide power supply range 7-24V DC power supply can be entered Performance: -Wide supply voltage range: 7-24V input -Ultra-low input offset voltage: 50μV maximum. -Ultra Low Input Bias Current: 1.0nA (maximum). -CMRR: 100dB -Ultra-low input offset voltage drift: 0.6μV / (maximum). -Ultra-stable, time: 2μV / month maximum -
Features: -Support CAN V2.0B specification, the communication speed 1Mb / S. -0 to 8-byte data field. -Three frames - standard, expand the frame and remote. -DC5V power supply module & SPI interface protocol control. -120 ohm termination resistors, Impedance matching, ensure drive capacity, long-distance data transmission against signal radiation. -Module dimensions - 4 x 2.8 cm / 1.57 x 1.1" (approx.). -Working Current - typ. 5mA & 1μA standby current. -Working Temperature - (Industrial grade) -40 ℃- 85℃. -
Specifications: Operating Voltage:5V Total resistance:100K ohm Port voltage:-5V~5V Taps:100 Interface: CS, U/D, INC Resistance increase mode: Linear Working current:3mA Packages/temp (℃): 8SOIC/-40~85 -
*Heating voltage: 5 ± 0.2V (AC · DC). *Current :5-10mA. *Detectable concentration range: PH0-14. *Test the temperature range :0-80 °. *Response time: ≤ 5S. *Stabilization time: ≤ 60S. *Component Power: ≤ 0.5W. *Working temperature: -10 ~ 50 ° (nominal temperature 20 °). *Humidity: 95% RH (nominal humidity 65% RH). *Life: 3 years. *Size: 42mm × 32mm × 20mm. -
Features 1 Input voltage range:4 -40VDC 2 Output voltage range:1.25-37VDC adjustable 3 Output current:2A 4 voltmeter range: 0 to 40V, error 0.1V 5 Input reverse polarity protection 6 Built in output short protection function 7 Built in thermal shutdown function 8 L x W x H =6.1*3.4*12 cm 9 Weight: 22g 10 LED digital voltmeter tube, the accuracy is adjustable function, can be aimed at your multimeteradjustable accurate. 11 Press the rightkey to let the display show the input or output voltage. when the right OUT led light, it shows output, the left IN led show input. -
ADC Bit rate: 16 Bit. Interface Type: I2C. Channels: 4 Channel AN0 AN1 AN2 AN3 or 2 differential inputs. Input voltage: 2.0-5.5v. Channel input voltage :0-VDD. Continuous Mode: Only 150μA. Single-Shot Mode: Auto Shut-Down. PROGRAMMABLE DATA RATE:8sps-860sps. Input range programmed control, 7 types input ranges: -0.256V ~ 0.256V, -0.512V ~ 0.512V, -1.024V ~ 1.024V, -2.048V ~ 2.048V, -4.096V ~ 4.096 V, -6.144V ~ 6.144V. I2C 7-bit addresses between 0x48-0x4B. Size:18mm*28mm. Applications -Portable instrumentation. -Consumer goods. -Battery monitoring. -Temperature measurement. -Factory automation and process controls. -
Feature: *3.3V or 5.0V DC power supply. *MCU interface: SPI. *Main ADC chip: TM7705 (AD7705 chip is fully compatible) *LM285-2.5 external reference voltage. Part peers using low-end domestic TL-431 is not a number as a reference, temperature stability and accuracy of the level difference. Please sights. *The input circuit with a divided resistor and RC filter, enabling customers to change their own gain range. *Chip programmable gain amplifier with a gain range: 1-128 times. *Chip buffer amplifier input with direct connection Sensor. -
Specifications Processor- Broadcom BCM2387 chipset. 1.2GHz Quad-Core ARM Cortex-A53 802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE) GPU -Dual Core VideoCore IV® Multimedia Co-Processor. Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode. Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure Memory- 1GB LPDDR2 Operating System- Boots from Micro SD card, running a version of the Linux operating system or Windows 10 IoT Dimensions- 85 x 56 x 17mm Power- Micro USB socket 5V1, 2.5A Connectors: *Ethernet- 10/100 BaseT Ethernet socket *Video Output- HDMI (rev 1.3 & 1.4 *Composite RCA (PAL and NTSC) *Audio Output -Audio Output 3.5mm jack, HDMI *USB- 4 x USB 2.0 Connector *GPIO Connector- 40-pin 2.54 mm (100 mil) expansion header: 2x20 strip *Providing 27 GPIO pins as well as 3.3 V, 5 V and GND supply lines *Camera Connector- 15-pin MIPI Camera Serial Interface (CSI-2) *Display Connector- Display Serial Interface (DSI) 15 way flat flex cable connector with two data lanes and a clock lane *Memory Card Slot- Push/pull Micro SDIO -
Multi function shield Features -4 digit 7-segment LED display module driven by two serial 74HC595’s. -4 LED’s. -10K potentiometer. -3 x push buttons. -Piezo buzzer. -DS18B20 temperature sensor interface (not included). -Infrared receiver interface. -Serial interface header for connection to serial modules. -
MQ-9 gas sensor has high sensitity to Carbon Monoxide, Methane and LPG. The sensor could be used to detect different gases contains CO and combustible gases, it is with low cost and suitable for different application. Character * Good sensitivity to CO/Combustible gas * High sensitivity to Methane, Propane and CO * Long life and low cost * Simple drive circuit Application * Domestic gas leakage detector * Industrial gas detector * Portable gas detector
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
YOUR PARTNER IN TECHNOLOGY SOLUTIONS
No.1030, Shriram Building,
Near Nagnath Par,
Sadashiv Peth, Pune – 411030,
Maharashtra, India
Visit Our store
STORE TIMINGS
Monday to Saturday
10:00 AM to 7.30 PM
(Store closed on all Sundays and Public Holidays)
NOTE
*All the prices are excluding Tax rates & are subject to change after a specific period of time.
Copyright © 2024@AbhinavDCS
