TL062 Dual Low-Power JFET-Input Operational Amplifier DIP-8 (TL062 DIP IC) The TL062 is a high-speed, dual JFET-input operational amplifier integrated circuit designed for applications where power consumption is a primary concern. It contains two independent operational amplifiers in a single 8-pin package, offering high input impedance and extremely low input bias currents. The TL062 is specifically optimized for ultra-low supply current (typically 200uA per amplifier), making it the dual-channel version of the TL061.
This IC is primarily used in battery-powered medical instrumentation, portable consumer electronics, and remote signal conditioning. It is a staple component for Arduino electronics projects in India that require dual-channel amplification or active filtering while maintaining a very low power profile for long-term battery operation.
Key Features
- Dual independent operational amplifiers in one package
- Ultra-low power consumption (200uA per amplifier typical)
- High input impedance (JFET input stage)
- Low input bias and offset currents
- Wide common-mode and differential voltage ranges
- Output short-circuit protection
- Internal frequency compensation for each amplifier
- High slew rate relative to its low power consumption
Specifications
- IC Type = Dual Operational Amplifier
- Supply Voltage = +/- 5V to +/- 18V (Dual) or 10V to 36V (Single)
- Logic Family = Linear / Analog
- Package Type = DIP
- Number of Pins = 8
- Mounting Type = Through-Hole
- Slew Rate = 3.5V/microsecond
- Gain Bandwidth Product = 1MHz
- Operating Temperature = 0 to 70 degrees Celsius
Interfaces
- 1OUT, 2OUT = Individual Amplifier Signal Outputs
- 1IN-, 2IN- = Inverting Inputs for Amplifiers 1 and 2
- 1IN+, 2IN+ = Non-Inverting Inputs for Amplifiers 1 and 2
- V- = Negative Supply Voltage (or Ground)
- V+ = Positive Supply Voltage
